ASME SA516 Grade 60 HIC Resistant Steel Plates HIC Tested

ASME SA516 Grade 60 HIC Resistant Steel Plate
(Hydrogen Induced Cracking NACE MR0175 & MR0103)

ASME SA516 Grade 60 HIC Resistant | ASTM A516 Grade 60 HIC Resistant - Pressure Vessel Steel Plates and HIC Resistant Boiler Quality Steel Plates

ASME SA516 Grade 60 HIC Resistant, ASTM A516 Grade 60 HIC Resistant, NACE MR0175, NACE MR0103, HIC Tested Plates for Sour Service

Prosaic Steel and Alloys India Manufacturer & Fabricator, Importer, Stockholder, ASME SA516 GRADE 60, premier suppliers of bulk Boiler Quality Steel Plates. ASME SA516 GRADE 60. We Stock worldwide. Fast delivery guaranteed for every size Boiler Quality Steel Plates ASME SA516 GRADE 60. ASME SA516 Grade 60 HIC Resistant Steel Plates, largest range of Boiler Quality Steel Plates ASME SA516 Grade 60 HIC Resistant Steel Plates Suppliers in India.

ASME SA516 Grade 60 HIC Resistant Steel Plates, SA516 Grade 60 HIC Tested Plate, SA516 Grade 60 NACE MR0175,, HIC Steel Plates Sour Service, HIC Resistant Plates Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service to ASTM A 516/ A 516M Standard

ASTM A 516 or ASME SA 516 grade is one of the most popular steel grades.

It is primarily intended for use in welded pressure vessels where notch toughness is important. These grades cover a range of tensile strengths from 55 - 90 MPa and this versatility explains much of the specifications popularity.

For plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised. For SA516 Grade 60, which is one of most popular steels, the ASME standard composition is as follows (dependent on grade)

HIC Resistant Steel Plate is used by boiler makers and fabricators when Hydrogen Induced Cracking is a big risk.


The most common grades of HIC resistant steel plate is A516 – to ASME/ASTM standards. It will generally be certified to grades 60, 65 and 70 so one plate can meet the requirements for any of the three grades A516 60/65/70 + HIC.

Once the A516 plate is produced a sample is then tested to see if it meets the required of TM0284, with is the NACE standard for the Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking, using one of two test solutions. In simplistic terms these are acidic solutions that mimic the corrosive effects of the conditions that induce HIC Cracking. The steel stays in the solution for a few days and then it is examined under a microscope and the cracks that have formed are recorded.

it is possible to get HIC plates to other standards – however about 90% of all HIC plates manufactured by Mills to client specifications are to A516 so the market for P355 plates with HIC resistance is small. As a consequence all of our lates for sour service are to the ASTM standard.

This material is restricted to extra low sulfur, phosphorus, and other residual elements. HIC tests are performed on a per heat / thickness basis in association with NACE Standard TM0284. CLR (Crack Length Ratio), CTR (Crack Thickness Ratio), and CSR (Crack Sensitivity Ratio) yield excellent results in keeping with the quality of the steel product.

We can supply:
Thickness from 3mm to 150mm
Width: from 1,500mm to 2,500mm
Length: from 6,000mm to 12,000mm

Technical conditions

1) Ultrasonic tested as per SA 578 or any other as per requirement
2) MTC acc to EN 10204 / 3.2
3) Charpy Impact tested at -20°C / -29°C / - 46°C.
4) Heat Treatment : Rolled / Normalised / N+T QT 5) BQ Plates with IBR form IV
6) Production: Hot Rolled

Available Specifications

HIC Resistant Steel Plates is produced for Prosaic Steel to the following steel specifications and grades - more information on a grade can be seen by clicking on it:

ASME SA516 Grade 60 / ASME SA516 Grade 65 / ASME SA516 Grade 70

ASTM A516 Grade 60 / ASTM A516 Grade 65 / ASTM A516 Grade 70

Specifications:

  • SA516 Grade 60/70 Dual Certified HIC NACE TM0284 Plates Hydrogen Induced Cracking
  • Hot Rolled Steel ASTM/ASME A/SA 516 Grade 60/70 Dual Certified HIC Tested Plates in accordance with Nace Test Method
  • TM 0284 Latest Edition using a test solution ASTM A516/516M / ASME SA516/516M Grade 60/70 HIC Tested (Hydrogen Induced Cracking) Nace TM-0284 2003 / Nace MR-0175
  • ASTM A516/516M / ASME SA516/516M Grade 60/70 HIC Tested (Hydrogen Induced Cracking)
  • Nace TM-0284 2003 / Nace MR-0175 / isO 15156-2, SSCC Tested ( Sulphide Stress corrosion Cracking)
  • Nace TM-0177 2005 / Nace MR-0103 2007 SOHIC (Stress Oriented Hydrogen Induced Cracking)
  • Tested Fine Grained Pressure Vessel Steel Plates For Sour Gas Service

Chemical Requirements of ASME SA516 Grade 60 HIC Resistant Steel Plates

ElementsComposition %
Grade 55
(Grade 380)
Composition %
Grade 60
(Grade 415)
Composition %
Grade 65
(Grade 450)
Composition %
Grade 70
(Grade 485)
Carbon, maxA
1/2 in. (12.5 mm) and under 0.18 0.21 0.24 0.27
Over 1/2 to 2 in. (12.5 to 50 mm), incl 0.20 0.23 0.26 0.28
Over 2 to 4 in. (50 to 100 mm), incl 0.22 0.25 0.28 0.30
Over 4 to 8 in. (100 to 200 mm), incl 0.24 0.27 0.29 0.31
Over 8 in. (200 mm) 0.26 0.27 0.29 0.31
Manganese, max - - - -
1/2 (12.5) and under: - - - -
Heat analysisB 0.60-0.90 0.60-0.90 0.85-1.20 0.85-1.20
Product analysisB 0.55-0.98 0.55-0.98 0.79-1.30 0.79-1.20
Over 1/2 (12.5) and under: - - - -
Heat analysis 0.60-1.20 0.85-1.20 0.85-1.20 0.85-1.20
Product analysis 0.55-1.30 0.79-1.30 0.79-1.30 0.79-1.30
Phosphorus, max A 0.035 0.035 0.035 0.035
Sulfur, max A 0.04 0.04 0.04 0.04
Silicon - - - -
Heat analysis 0.15-0.40 0.15-0.40 0.15-0.40 0.15-0.40
Product analysis 0.13-0.45 0.13-0.45 0.13-0.45 0.13-0.45

A) Applies to both heat and product analysis
B) Grade 60 plates 1/2 in. (12.5 mm) and under in thickness may have 0.85-1.20% manganese on heat analysis and 0.79-1.30% manganese on product analysis.

Tensile Requirements of ASME SA516 Grade 60 HIC Resistant Steel Plates

 Grade 55
(Grade 380)
Grade 60
(Grade 415)
Grade 65
(Grade 450)
Grade 70
(Grade 485)
Tensile strength, ksi (MPa) 55-75(380-515) 60-80(415-550) 65-85(450-585) 70-90(485-620)
Yield strength, min.B ksi (MPa) 30(205) 32(220) 35(240) 38(260)
Elongation in 8 in. (200 mm), min, % 23A 21A 19A 17A
Elongation in 2 in. (50 mm), min, % 27A 25A 23A 21A

A) See Specification A 20/A 20M.
B) Determined by either the 0.2% offset method or the 0.5% extension-under-load method.


ASME SA516 Grade 60 HIC Resistant Steel Plates Packing

ASME SA516 Grade 60 HIC Resistant Steel Platesis sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. ASME SA516 Grade 60 HIC Resistant Steel Plates packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock

Types of Packaging:

  • - Bundles (hexagonal)
  • - Wooden Boxes
  • - Crates (steel/wooden)
  • - Special crates for U-Bend tubes with each radius separated
  • - Packaging for SS ASME SA516 Grade 60 HIC Resistant Steel Plates ASME SA516 as per customer's requirements

Special Features:

  • - Each bundle covered with plastic for protection against extreme weather.
  • - End ofASME SA516 Grade 60 HIC Resistant Steel Plates protected by plastic Strip.
  • - Bundles strapped with plastic strips.
  • - Each radius of U-Bend tube separated by a separator.
  • - Packaging list (laminated) placed with box/crate.

ASME SA516 Grade 60 / ASTM A516 Grade 60 HIC Resistant Steel Plates Sizes Available in Stock with Price

  • 0.2 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 0.3 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 0.4 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 0.8 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 1 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 1.65 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 2.11 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 3.1 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 04 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 05 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 06 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 08 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 10 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 12 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 15 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 16 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 18 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 20 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 22 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 25 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 28 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 30 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 32 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 35 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 36 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 38 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 40 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 42 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 45 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 50 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 52 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 60 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 62 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 65 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 70 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 80 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 90 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 100 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 110 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 120 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 125 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 130 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates
  • 150 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASME SA516 Grade 60 HIC Plates, ASTM A516 Grade 60 HIC Tested Plates, ASME SA516 Grade 60 HIC Resistant, ASTM SA516 Grade 60 HIC Resistant Steel Plates, HIC Tested Boiler Quality Steel Plates

We export ASME SA516 Grade 60 HIC Resistant Steel Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Prosaic Steel and Alloys is a well known worldwide exporter of ASME SA516 Grade 60 HIC Resistant Steel Plates, Prosaic Steel and Alloys is committed to provide each and every customer with the highest standard of customer service. We deals in ASME SA516 Grade 60 / ASTM A516 Grade 60 HIC Resistant Steel Plates in India & Overseas, offering a wide range of ASME SA516 Grade 60 / ASME SA516 Grade 60 HIC Resistant Steel Plates

Prosaic Steel and Alloys is Leading Manufacturer, Distributor, Exporter, Stockholder and Supplier ofASME SA516 Grade 60 HIC Resistant Steel Plates in United States of America (USA), Saudi Arabia, Italy, Netherlands, Germany, Canada, Singapore, Malaysia, Indonesia