ASTM A516 GRADE 60 / 70 Steel Plates

ASTM A516 GRADE 60 / 70 - Boiler Quality Steel Plates and Pressure Vessels Steel Plates

ASTM A516 Grade 60 Plate, ASTM A516 Grade 70 Plate, ASME SA516 Gr.70 Plate, A516 Gr. 70 NACE MR 1075 Steel Plates, A516 Grade 70 Plate Suppliers in India. Avaible ASTM A516 Grade 70 Circle, ASTM A516 Grade 70 Ring, ASTM A516 Grade 70 Blanks at Best Price with Impact Tested, Normalised Heat Treatment, HIC Tested, NACE Compliance.

ASTM A516 Grade 70 is Equivalent to Boiler Quality Plates with Indian Specificaition, Stocking Full Range of ASTM A516 Grade 70 Plate with Data Sheet.

A516 Grade 70, A516 Grade 70 Plate, A516 Grade 60 Plate, A516 Grade 70 Boiler Quality Plate, A516 Grade 70 Plate Supplier, BQ Plate, A516 Grade 60 Suppliers ASTM A516 Grade 70 or ASME SA 516 grade 60 is one of the most popular steel grades.

ASTM A516 Grade 60/70 Boiler Quality Plates and ASTM A516 Grade 60/70 Pressure Vessel Steel plates are primarily intended for use in welded pressure vessels where notch toughness is important. These grades cover a range of tensile strengths from 55 - 90 MPa and this versatility explains much of the specifications popularity.

ASTM A 516 Grade 60/70 Plate Standard Specification Pressure Vessel Plates, Carbon Steel, is used for Moderate and Lower-Temperature Service

For plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised. For A516 grade 70, which is one of most popular steels, the ASME standard composition is as follows (dependent on grade)

ASTM A516 specification steel is used throughout the oil and gas, chemical and power generation industry and can be tested to exceed your specified requirements. HIC Testing is one such requirement as this material is used commonly in sour service/ wet h2s corrosive environments and so knowing how susceptible the material will be to hydrogen sulphide corrosion is imperative

ASTM A516 Standard steel plates are intended for use in pressure vessels where increased strength is is important.

We can supply:

Thickness from 3mm to 150mm
Width: from 1,500mm to 2,500mm
Length: from 6,000mm to 12,000mm

Technical conditions
1) Ultrasonic tested as per SA 578 or any other as per requirement
2) MTC acc to EN 10204 / 3.2
3) Charpy Impact tested at -20°C / -29°C / - 46°C.
4) Heat Treatment : Rolled / Normalised / N+T QT 5) BQ Plates with IBR form IV
6) Production: Hot Rolled

ASTM A516 Grade 60 / ASTM A516 Grade 70 - Chemical Requirements

Element Composition %
Grade 55
[Grade 380]		 Grade 60
[Grade 415]		 Grade 65
[Grade 450]		 Grade 70
[Grade 485]
Carbon, max a,b :
1⁄2 in. [12.5 mm] and under 0.18 0.21 0.24 0.27
Over 1⁄2 in. to 2 in. [12.5 to 50 mm], incl 0.20 0.23 0.26 0.28
Over 2 in. to 4 in. [50 to 100 mm], incl 0.22 0.28 0.25 0.30
Over 4 to 8 in. [100 to 200 mm], incl 0.24 0.27 0.29 0.31
Over 8 in. [200 mm] 0.26 0.27 0.29 0.31
Manganese, b :
1⁄2 in. [12.5 mm] and under
Heat analysis 0.60–0.90 0.60–0.90 c 0.85–1.20 0.85–1.20
Product analysis 0.55–0.98 0.55–0.98 c 0.79–1.30 0.79–1.30
Over 1⁄2 in. [12.5 mm]:
Heat analysis 0.60–1.20 0.85–1.20 0.85–1.20 0.85–1.20
Product analysis 0.55–1.30 0.79–1.30 0.79–1.30 0.79–1.30
Phosphorus, max a 0.25 0.25 0.25 0.25
Sulphur, max a 0.25 0.25 0.25 0.25
Silicon
Heat analysis 0.15–0.40 0.15–0.40 0.15–0.40 0.15–0.40
Product analysis 0.13–0.45 0.13–0.45 0.13–0.45 0.13–0.45
a Applies to both heat and product analyses.
b For each reduction of 0.01 percentage point below the specified maximum for carbon, an increase of 0.06 percentage point above the specified maximum for manganese is permitted, up to a maximum of 1.50 % by heat analysis and 1.60 % by product analysis.
c Grade 60 plates 1⁄2 in. [12.5 mm] and under in thickness may have 0.85–1.20 % manganese on heat analysis, and 0.79–1.30 % manganese on product analysis.

ASTM A516 Grade 60 / ASTM A516 Grade 70 - Tensile Requirements

ASTM A516 Grade 55
[380]		 Grade 60
[415]		 Grade 65
[450]		 Grade 70
[485]
Tensile strength, ksi [MPa] 55–75 [380–515] 60–80 [415–550] 65–85 [450–585] 70–90 [485–620]
Yield strength, min,a ksi [MPa] 30 [205] 32 [220] 35 [240] 38 [260]
Elongation in 8 in. [200 mm], min, % b 23 21 19 17
Elongation in 8 in. [50 mm], min, % b 27 25 23 21
a Determined by either the 0.2 % offset method or the 0.5 % extension-under-load method.
b See Specification A20/A20M for elongation adjustment.

Equivalent Specifications and Standards of ASTM A516 Grade 60 / ASTM A516 Grade 70

Standard ASTM A516 Grade 60 ASTM A516 Grade 70
ASME ASME SA516 Grade 60 ASME SA516 Grade 70
DIN Standard DIN 17155 HII -
British Standard BS1501-161-430A BS1501-224-490A/B
European Norm EN10028 P265GH EN10028 P355GH

ASTM A516 Grade 60 / 70 Steel Plate Supplementary Requirements

The following supplementary requirements from ASTM A20 can be met by A 516:

  • S1 – Vacuum treatment
  • S2 – Product Analysis
  • S3 – Simulated Post Weld Heat Treatment
  • S4.1 – Additional Tensile Test
  • S5 – Impact Test (Charpy Notch)
  • S6 – Dropweight Test
  • S7 – Hot Tensile Test
  • S8 – UT (Ultrasonic Testing) to A435
  • S9 – Magnetic Particle Examination
  • S11 – UT to A577
  • S12 – UT to A578
  • S17 – Vacum Carbon Deoxidised Steel

Pressure Vessel Plate or Boiler Plate?

we make a distinction between we make a distinction between ASTM A516 Grade 60/70 Boiler Plates and ASTM A516 Grade 60/70 Pressure Vessel Plates. Some other steel plate companies class everything as pressure vessel plate: there is no right and wrong about this.

The most important thing to know as a potential customer of Prosaic Steel is that we stock, process, and distribute all of the popular grades of Boiler and Pressure Vessel specifications like ASTM A516, ASME SA516, eN 10028-3, and BS 1501. You may call the steel whatever you want and leave us to worry about matching our stocks to your requirements.

ASTM A516 GRADE 60/70 HIC TESTED STEEL PLATES

HIC (Hydrogen Induced Cracking) is the result of a corrosive reaction between carbon steel and hydrogen sulphide. Wet hydrogen sulphide (H2S) cracking in steel has been a problem in petroleum refining and upstream oil and gas processing since the 1950s. Working conditions where wet H2S prevails are often described as sour service conditions and the term sour gas can be also be used in this context. As more fields rich in H2S are exploited, and this is increasingly the case, the problem is increasingly significant for equipment fabricated in potentially sensitive carbon-manganese (C-Mn) steels.

Steel in contact with water containing H2S will corrode producing hydrogen at its surface. H2S not only inhibits the formation of hydrogen gas, so reducing the opportunity for it to escape, but promotes its absorption in to the steel. At typical working temperatures below 200 degrees Celsius hydrogen atoms can become trapped causing embrittlement and ultimately cracking.

The use of steel pressure vessels in industries such as oil and gas processing requires a robust steel which is resilient to the long term corrosive effects of hydrogen sulphide in sour service applications. In order to provide better H2S resistance the properties of C-Mn steels have been progressively developed to improve chemistry, cleanliness, homogeneity, and microstructure

ASTM A516 Grade 60 / 70 Steel Plate Sizes Available in Stock with Price

  • 0.2 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 0.3 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 0.4 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 0.8 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 1 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 1.65 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 2.11 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 3.1 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 04 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 05 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 06 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 08 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 10 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 12 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 15 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 16 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 18 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 20 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 22 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 25 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 28 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 30 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 32 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 35 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 36 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 38 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 40 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 42 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 45 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 50 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 52 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 60 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 62 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 65 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 70 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 80 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 90 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 100 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 110 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 120 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates
  • 120 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in ASTM A516 Grade 60, ASTM A516 Grade 70, ASME SA516 Grade 60, ASME SA516 Grade 70 Boiler Quality Steel Plates

We export ASTM A516 Grade 60 / 70 Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Prosaic Steel and Alloys is a well known worldwide exporter of ASTM A516 Grade 60 / 70 Boiler Quality Steel Plates, Prosaic Steel and Alloys is committed to provide each and every customer with the highest standard of customer service. We deals in ASTM A516 Grade 60 / ASTM A516 Grade 70 Boiler Quality Steel Plates in India & Overseas, offering a wide range ofASTM A516 Grade 60 / 70 Boiler Quality Steel Plates

Prosaic Steel and Alloys is Leading Manufacturer, Distributor, Exporter, Stockholder and Supplier of ASTM A516 Grade 60 / 70 Plates in United States of America (USA), Saudi Arabia, Italy, Netherlands, Germany, Canada, Singapore, Malaysia, Indonesia