EN 10216-3 P275NL1 is a seamless steel pipe specifically designed for use in pressure vessels, boilers, and heat exchangers. It is a normalized fine grain steel with a minimum yield strength of 275 MPa (405,000 psi). The P275NL1 pipe is designed to operate at high temperatures, making it suitable for use in the oil and gas industry as well as power generation plants.
One of the key features of the EN 10216-3 P275NL1 Pipe is its ability to withstand high pressure. It has a maximum allowable working pressure of 250 bar (3,625 psi) at a temperature of 50°C (122°F). This makes it suitable for use in a wide range of high pressure applications, such as in pipelines for the transportation of oil and gas.
In addition to its high pressure resistance, the P275NL1 Pipe also has excellent weldability. It can be easily welded using traditional welding methods, making it suitable for use in a wide range of fabrication processes.
The P275NL1 pipe is also corrosion resistant, making it suitable for use in a variety of environments. It has a low carbon content, which helps to reduce the risk of corrosion, and it is also resistant to sulfur and phosphorous, two elements that can cause corrosion in steel pipes.
Steel Grade | Steel No. | C max. |
Si max. |
Mn |
P max. |
S max. |
Cr max. |
Mo max. |
Ni max. |
Al max. |
Cu max. |
N max. |
Nb max. |
Ti max. |
V max. |
Nb+Ti+V max. |
P275NL1 | 1.0488 | 0,16 | 0,40 | 0,50 to 1,50 |
0,025 | 0,02 | 0,30 | 0,08 | 0,50 | 0,02 | 0,30 | 0,02 | 0,05 | 0,04 | 0,05 | 0,05 |
P275NL2 | 1.1104 | 0,16 | 0,40 | 0,50 to 1,50 |
0,025 | 0,015 | 0,30 | 0,08 | 0,50 | 0,02 | 0,30 | 0,02 | 0,05 | 0,04 | 0,05 | 0,05 |
The material shall conform to the requirements as proscribed:
Mechanical properties in room temperature | |||||||||||||||
Pipe types |
Steel grades |
Thermal processing stage | Mechanical properties during tensile testing | ||||||||||||
Upper yield limit or yield strength Re or Rp0,2 min for wall thickness T in mm | Tensile strength Rm for wall thickness T in mm | Elongation A% min |
|||||||||||||
<\=12 | >12- <\=20 | >20- <\=40 | >40- <\=50 | >50- <\=65 | >65- <\=80 | >80- <\=100 | <\=20 | >20- <\=40 | >40- <\=65 | >65- <\=100 | |||||
MPa | MPa | 1 | t | ||||||||||||
Fine grain alloy steel pipes P275NL1, P275NL2 According to PN-EN 10216-3 |
P275NL1 | +N | 275 | 265 | 255 | 245 | 235 | 390- 530 | 390- 510 | 360- 480 | 24 | 22 | |||
P275NL2 | +N |
Outside diameter and wall thickness tolerances | |||||
Outside diameter D mm | Permissible deviations of outside diameter D | Permissible deviations of wall thickness t depending on the T/D ratio | |||
<\=0,025 | >0,025 <\=0,050 |
>0,050 <\=0,10 |
>0,10 | ||
D<\=219,1 | +\- 1% or =\- 0,5mm mm depending on which is greater | +\- 12,5% or 0,4 mm depending on which is greater | |||
D>219,1 | =\- 20% | =\- 15% | =\- 12,5% | =\- 10% |
Inside diameter and wall thickness tolerance | |||||
Permissible deviations of inside diameter | Permissible deviations of T for the given T/d ratio | ||||
d | dmin | <\-0,025 | >0,025 <\=0,050 |
>0,050 <\=0,10 |
>0,10 |
+\- 1% or +\- 2mm depending on which is greater | +2% +4mm 0 depending on which is greater |
+\-20% | +\-15% | +\-12,5% | +\-10% |
For the outside diameter of D>\=355,6 mm, local deviation outside of the upper deviation limit by further 5% of the wall thickness T is permitted |
Inspection and test type | Test frequency | Test category | ||
Mandatory tests | Ladle analysis | One per ladle | 1 | 2 |
Tensile testing in room temperature | One per every test pipe | X | X | |
Flattening test for D<600mm and the ratio of D<\=0,15 but T<\=40mm or ring testing for D>150mm and T <\=40mm | X | X | ||
Rolling test on a mandrel bar for D<\=150mm and T<\=10mm or ring testing for D<\=114,3mm and T <\=12,5mm | X | X | ||
Resilience testing at the temperature of 20 ºC | X | X | ||
Tightness testing | Every pipe | X | X | |
Dimensional testing | X | X | ||
Visual inspection | X | X | ||
NDT in order to identify longitudinal discontinuity | Every pipe | X | X | |
Material identification for alloy steel | X | X | ||
Optional tests | Final product analysis | One per ladle | X | X |
Tensile testing at elevated temperatures (NH, NL, QL grades) | One per ladle and for the same thermal processing conditions | X | X | |
Resilience testing at a temperature different than the standard test temperature | One per every test pipe | X | X | |
X | X | |||
Wall thickness measurement at a distance from pipe ends | X | X | ||
Non-destructive testing in order to identify transverse discontinuity | Every pipe | X | X | |
Non-destructive testing in order to identify delamination | X | X |
Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / isO 10474 3.1 Mill Test Certificate, NACE MR-0175 / isO 15156, NACE MR-01-03 / NACE MR-01-75 / isO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
EN 10216-3 P275NL1, best quality, wide variety of EN 10216-3 P275NL1 Pipes, EN 10216-3 P275NL1 Seamless Pipes India, EN 10216-3 P275NL1 Pipes distributor Mumbai, EN 10216-3 P275NL1 Pipes traders, prime quality EN 10216-3 P275NL1 Pipes, Source for EN 10216-3 P275NL1 Pipes, specialize in EN 10216-3 P275NL1 Pipes, EN 10216-3 P275NL1 with Test Certificate
EN 10216-3 P275NL1 Pipe is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation.
EN 10216-3 P275NL1 Pipe packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.
Delivery: Within 10-25 days or asap if we have enough stock
We export EN 10216-3 P275NL1 Pipes to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary,Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.
Prosaic Steel and Alloys is a well known worldwide exporter of EN 10216-3 P275NL1 Pipe, Prosaic Steel and Alloys is committed to provide each and every customer with the highest standard of customer service. We deals in EN 10216-3 P275NL1 Pipe in India & Overseas, offering a wide range of EN 10216-3 P275NL1 Pipe.
en 10216-3 pdf, en 10216-3 equivalent astm, en 10216-4, en 10216-2, en 10216-5, en 10216-4 pdf, p355nh equivalent astm m, Chemical Compostion of EN 10216-3 P275NL1 Pipe, Supplier of EN 10216-3 P275NL1 Pipe, Tensile of EN 10216-3 P275NL1 Pipe, EN 10216-3 P275NL1 Pipe Equivalent, p275nl1 equivalent astm material, 1.0488 Steel, PN-EN 10216-3