ASTM A269 STAINLESS STEEL TUBES, ASTM A269 STAINLESS STEEL TUBING, ASTM A29 SEAMLESS TUBING, ASTM A269 WELDED TUBING, ASTM A269 WELDED TUBES, ASME SA269 STAINLESS TUBES, A269 COLD DRAW TUBES

All Sizes and Grades ASTM Stainless Steel Tubes Available in ASTM A269 TP304, ASTM A269 TP304L, ASTM A269 TP304H, ASTM A269 TP309S, ASTM A269 TP316, ASTM A269 TP316L, ASTM A269 TP316H, ASTM A269 TP317L, ASTM A269 TP321, ASTM A269 TP321H, ASTM A269 TP347, ASTM A269 TP347H, ASTM A269 TP904L ETC.

  1. Home
  2. /
  3. Stainless Steel Pipes & Tubes, Duplex and Super Duplex Pipes & Tubes
  4. /
  5. ASTM A269 Pipes -304/L, 309, 310s, 316/L/Ti, 321, 347, 904L

Manufacturer, Stockholder, Distributor, Exporter and Supplier of ASTM A269 Stainless Steel Tubes based in India. High Quality ASTM A269 Stainless Steel Tubes at Competitive Price. ASTM A269 Stainless Steel Tubing Ready Stock Inventory of more than 10000 Metric Ton

ASTM A269 Stainless Steel Tubes Seamless / Welded

ASTM A269 STAINLESS STEEL TUBES, ASTM A269 STAINLESS STEEL PIPES, ASTM A269 TUBES, ASTM A269 TP304, ASTM A269 TP304L, ASTM A269 TP304H, ASTM A269 TP309S, ASTM A269 TP310, ASTM A269 TP310S, ASTM A269 TP316, ASTM A269 TP316L, ASTM A269 TP316H, ASTM A269 TP317L, ASTM A269 TP321, ASTM A269 TP321H, ASTM A269 TP347, ASTM A269 TP347H, ASTM A269 TP904L ASTM A269 specification covers nominal-wall-thickness, seamless and welded austenitic steel tubing for general corrosion-resisting and low- or high-temperature service. All material shall be furnished in the heat-treated condition. The steel shall conform to the chemical composition requirements. Different mechanical test requirements that includes, flaring test, flange test, hardness test, and reverse flattening test are presented. Also, each tube shall be subjected to the non-destructive electric test or the hydrostatic test.

Prosaic Steel and Alloys Stock for clients a sturdy range of ASTM A269 Stainless Steel Pipes and ASTM A269 Stainless Steel Tubes that are capacitated to withstand temperature variations and thus are used in heat transfer process equipment like boilers, super heaters, heat exchangers, condensers and similar applications. These stainless steel pipes can be customized depending upon their industrial usage and hold the following technical details:

Prosaic Steel and Alloys Manufacture and Supply ASTM A269 TP304, ASTM A269 TP304L, ASTM A269 TP304H, ASTM A269 TP309S, ASTM A269 TP310, ASTM A269 TP310S, ASTM A269 TP316, ASTM A269 TP316L, ASTM A269 TP316H, ASTM A269 TP317L, ASTM A269 TP321, ASTM A269 TP321H, ASTM A269 TP347, ASTM A269 TP347H, ASTM A269 TP904L

ASTM A269 - Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

Seamless Pipe, ERW Pipe, EFW Pipe, DSAW Pipe and Forged Pipe

Sizes (Seamless): 1/2” NB - 2” NB
Sizes (ERW): 1/2” NB - 2” NB
Wall Thickness available: Schedule 01 mm - 16 mm (heavier on request)

Grades:
Stainless Steel Seamless Pipe ASTM A312 TP304/L/H, 310s/H, 316/L/H/Ti, 317L, 321/H, 347/H, 904L
Stainless Steel Welded Pipe ASTM A312 TP304/L/H, 310s/H, 316/L/H/Ti, 317L, 321/H, 347/H, 904L
Stainless Steel Seamless Tube ASTM A213 TP304/L/H, 310s/H, 316/L/H/Ti, 317L, 321/H, 347/H, 904L
Stainless Steel Seamless Tube ASTM A269 TP304/L/H, 310s/H, 316/L/H/Ti, 317L, 321/H, 347/H, 904L
Stainless Steel Welded Tube ASTM A249 TP304/L/H, 310s/H, 316/L/H/Ti, 317L, 321/H, 347/H, 904L
Stainless Steel EFW Tube ASTM A358 CL. 1 to 5 TP304/L/H, 310s/H, 316/L/H/Ti, 317L, 321/H, 347/H, 904L
Stainless Steel Fabricated pipe welded from plates Fabricate form S.S. Plates as per ASTM A240 TP304/L/H, 310s/H, 316/L/H/Ti,   317L, 321/H, 347/H, 904L with or without 10% Radiographic Welding.

Scope
1.1 This specification covers grades of nominal-wall-thickness, stainless steel tubing for general corrosion-resisting and low- or high-temperature service, as designated in Table 1.

Grade Composition, %
TP 
XM-29
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
UNS DesignationA S24000 S31254 S31266 S31725 S31726 S31727 S32053 S30600A S32654 S34565 S35045 N08367 N08925 N08926 N08904
Carbon 0.08 0.020 0.030 
max
0.035 0.035 0.030 0.030 0.018 0.020 0.030 0.06– 
0.10
0.030 0.020 0.020 0.020
Manganese 11.5– 
14.5
1.00 2.00–4.00 2.00 2.00 1.00 1.00 2.0 2.0– 
4.0
5.0– 
7.0
1.50 2.00 1.00 2.00 2.00
Phosphorus 0.060 0.030 0.035 0.045 0.045 0.030 0.030 0.020 0.030 0.030 0.045 0.040 0.045 0.030 0.040
Sulfur. 0.030 0.015 0.020 0.030 0.030 0.030 0.010 0.020 0.005 0.010 0.015 0.030 0.030 0.010 0.030
Silicon 1.00 0.80 1.00 1.00 1.00 1.00 1.00 3.7–4.3 0.50 1.00 1.00 1.00 0.50 0.50 1.00
Nickel 2.3– 
3.7
17.5– 
18.5
21.0–24.0 13.5– 
17.5
14.5– 
17.5
14.5– 
16.5
24.0– 
26.0
14.0– 
15.5
21.0– 
23.0
16.0– 
18.0
32.0– 
37.0
23.5– 
25.5
24.0–26.0 24.0– 
26.0
23.0– 
28.0
Chromium 17.0– 
19.0
19.5– 
20.5
23.0–25.0 18.0– 
20.0
17.0– 
20.0
17.5– 
19.0
22.0– 
24.0
17.0– 
18.5
24.0– 
25.0
23.0– 
25.0
25.0– 
29.0
20.0– 
22.0
19.0–21.0 19.0– 
21.0
19.0– 
23.0
Molybdenum ... 6.0– 
6.5
5.2–6.2 4.0– 
5.0
4.0– 
5.0
3.8– 
4.5
5.0– 
6.0
0.20 
max
7.0– 
8.0
4.0– 
5.0
  6.0– 
7.0
6.0–7.0 6.0– 
7.0
4.0– 
5.0
Titanium . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15– 
0.60
. . . . . . . . . . . .
Columbium . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.10 
max
. . . . . . . . . . . . . . .
Tantalum . . . . . . . . . . . . . . .   . . .   . . . . . . . . . . . . . . . . . . . . .
NitrogenF 0.20– 
0.40
0.18– 
0.25
0.35–0.60 0.20 
max
0.10– 
0.20
0.15– 
0.21
0.17– 
0.22
  0.45– 
0.55
0.40– 
0.60
. . . 0.18– 
0.25
0.10–0.20 0.15– 
0.25
0.10 
max
Vanadium . . .     . . . . . .   . . .   . . .   . . . . . . . . . . . . . . .
 Copper . . . 0.50– 
1.00
1.00–2.50 . . . . . . 2.8– 
4.0
. . . 0.50 
max
0.30– 
0.60
. . . 0.75 0.75 
max
0.80–1.50 0.50– 
1.50
1.00– 
2.00
 Others . . . . . . W 1.50–2.50 . . . . . . . . . . . . . . . . . . . . . Al 
0.15– 
0.60
. . . . . . . . . . . .

(A) New designation established in accordance with Practice E527 and SAE J1086.
(B) For small diameter or thin walls, or both, where many drawing passes are required, a carbon maximum of 0.040 % is necessary in grades TP 304L, TP 304LN, 316L and 316LN. Small outside diameter tubes are defined as those with less than 0.500 in. [12.7 mm] in outside diameter and light walls are those less than 0.049 in. [1.2 mm] in minimum wall thickness.
(C) Maximum, unless otherwise indicated. Where ellipses (. . .) appear in this table, there are no requirements and analysis for the element need not be determined or reported.
(D) Grade TP 321 shall have a titanium content of not less than five times the sum of the carbon and nitrogen content and not more than 0.70 %.
(E) Grade TP 348 shall have a columbium plus tantalum content of not less than ten times the carbon content and not more than 1.10 %.
(F) The method of analysis for nitrogen shall be a matter of agreement between the purchaser and manufacturer.
1.2 The tubing sizes and thicknesses usually furnished to this specification are 1/4 in. [6.4 mm] in inside diameter and larger and 0.020 in. [0.51 mm] in nominal wall-thickness and heavier.
1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.38 mm] in thickness.
NOTE 1: Additional testing requirements may apply for use in ASME B31.3 applications.
1.4 Optional supplementary requirements are provided and, when one or more of these are desired, each shall be so stated in the order.

1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.

 

Referenced Documents
ASTM Standards
A262 Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A480/A480M Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A632 Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A1016/A1016M Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless

Steel Tubes
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) ASME Piping Code
ASME B31.3 Process Piping Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Two Park Ave., New York, NY 10016-5990, http://www.asme.org.

Other Standard
SAE J1086

Keywords
Corrosive Service Applications - High-Temperature Service Applications - High-Temperature Services - Low-Temperature Services - Seamless Pipes And Tubes - Seamless Steel Tubes - Stainless Steel Tubes - Steel Tubes - Tubular Products - Welded Pipes And Tubes - Welded Steel Tubes

Are you Looking for a Reliable Source for Buying ASTM A269 Stainless Steel Pipes and ASTM A269 Stainless Steel Tubes

Prosaic Steel and Alloys offer Great Discount on High Quality ASTM A269 Stainless Steel Pipes and ASTM A269 Stainless Steel Tubes

We export ASTM A269 Stainless Steel Tube to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Prosaic Steel and Alloys is a well known worldwide exporter of A269 Stainless Steel Seamless Pipes and Tubes, Prosaic Steel and Alloys is committed to provide each and every customer with the highest standard of customer service. We deals in A269 Stainless Steel Tubes in India & Overseas, offering a wide range of A213 Stainless Steel Seamless Pipes and Tubes.

We Keep Stock:

 



PRODUCTS




LOCATION
Prosaic Steel and Alloys
429, Pathe Bapurao Marg, Ahmed Building, Opp Islampura Street, Mumbai- 400004
Maharashtra INDIA
Telephone: +91 022 23874482 / +91 022 6659 5367
elephone: +91 022 23874482 / +91 022 6659 5367

Email: [email protected]
Website: www.prosaicsteel.com


We export to:

Savoy Piping Inc - API 5L grade B, X42, X46, X52, X56, X60, X65, A333 Grade 3, 6, A106 Grade C, A671 CC60, CC65, CC70, A672, A335 P5, P9, P11, P22, P91, A358 304, 316L, 310, 321, 347, A312 Pipes

ASTM A269 Stainless Steel Tubes Mumbai, ASTM A269 Stainless Steel Tubes Navi Mumbai, ASTM A269 Stainless Steel Tubes Pune, ASTM A269 Stainless Steel Tubes Coimbatore, ASTM A269 Stainless Steel Tubes Chennai, ASTM A269 Stainless Steel Tubes Delhi, ASTM A269 Stainless Steel Tubes Ahmedabad, ASTM A269 Stainless Steel Tubes Tarapur, ASTM A269 Stainless Steel Tubes Nasik, ASTM A269 Stainless Steel Tubes Nagpur, Steel Pipes and Steel Tubes Jharkhand, ASTM A269 Stainless Steel Tubes Chhattisgarh, ASTM A269 Stainless Steel Tubes Kolkata, ASTM A269 Stainless Steel Tubes Hyderabad, ASTM A269 Stainless Steel Tubes Hubli, ASTM A269 Stainless Steel Tubes Gujarat, Steel Pipes and Steel Tubes Maharashtra, ASTM A269 Stainless Steel Tubes Kerela, Steel Pipes and Steel Tubes Andhra Pradesh, ASTM A269 Stainless Steel Tubes Tamil Nadu, ASTM A269 Stainless Steel Tubes Karnataka, ASTM A269 Stainless Steel Tubes Banglore, ASTM A269 Stainless Steel Tubes Bangaluru, ASTM A269 Stainless Steel Tubes Cuttack, ASTM A269 Stainless Steel Tubes Hissar, ASTM A269 Stainless Steel Tubes Bhopal, Steel Pipes and Steel Tubes Manipur, ASTM A269 Stainless Steel Tubes Manglore, Steel Pipes and Steel Tubes Bilaspur, ASTM A269 Stainless Steel Tubes Bhillai, Steel Pipes and Steel Tubes Ankleshwar, ASTM A269 Stainless Steel Tubes Calicut, Steel Pipes and Steel Tubes Cochin, ASTM A269 Stainless Steel Tubes Kottayam, Steel Pipes and Steel Tubes Saudi Arabia, ASTM A269 Stainless Steel Tubes Iran, ASTM A269 Stainless Steel Tubes Qatar, ASTM A269 Stainless Steel Tubes Oman, ASTM A269 Stainless Steel Tubes Turkey, ASTM A269 Stainless Steel Tubes Netherland, ASTM A269 Stainless Steel Tubes Spain, ASTM A269 Stainless Steel Tubes Germany

Contact Prosaic Steel & Alloys today for a Competitive Quotation...
call : +91 88791 70590
e-mail:[email protected]

Follow On Us Best Pipe Supplier, Prosaic Steel and Alloys Facebook Page Best Pipe Supplier, Prosaic Steel and Alloys Linkedin Page Best Pipe Supplier, Prosaic Steel and Alloys Instagram Page Best Pipe Supplier, Prosaic Steel and Alloys Youtube Page


stainless steel pipe, carbon steel pipe, alloy steel pipe, duplex pipe, monel, inconel, hastelloy, titatnium, pipe dealer, supplier, exporter