ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes | ASTM A312 TP 347 / 347H Stainless Steel Seamless Tubes

ASTM A312 TP 347 Stainless Steel Seamless Pipes | ASTM A312 TP 347H Stainless Steel Seamless Pipes | ASTM A312 TP 347 Stainless Steel Seamless Tubes| ASTM A312 TP 347H Stainless Steel Seamless Tubes| ASTM A312 TP 347 / 347H SS Pipes and Tubes

  1. Home
  2. /
  3. Stainless Steel Pipes & Tubes, Duplex and Super Duplex Pipes & Tubes
  4. /
  5. 347 Stainless Steel Pipes and Tubes

Prosaic Steel and Alloys India Manufacturer & Fabricator, Importer, Stockholder, ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes and Tubes, premier suppliers of bulk ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes and Tubes. We Stock & Supply worldwide. Fast delivery guaranteed for every size ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes and Tubes, largest range of ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes and Tubes Suppliers in India.

347 Stainless Steel Pipes and Tubes

ASTM A312 TP 347 Stainless Steel Seamless Pipes, ASTM A312 TP 347 Stainless Steel Seamless Tubes, ASTM A312 TP 347H Stainless Steel Seamless Pipes, ASTM A312 TP 347H 
Stainless Steel Seamless Tubes, ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes Tubes Grades:
Type 304 | Type 304L | Type 304H | Type 309 | Type 310sType 316 | Type 316L | Type 316H | Type 316Ti Type 317L | Type 321 | Type 321H |  Type 347  | Type 347HType 410 | Type 904L | UNS S31803  | UNS S32750  | UNS S32760

ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes and Tubesis variant of the basic austenitic 18/8 Grade 304 with added Columbium - the introduction of Columbium stabilizes the steel and eliminates carbide precipitation which subsequently causes intergranular corrosion.

The steel has excellent forming and welding qualities and excellent toughness even at cryogenic temperatures.


Benefits of 347 / 347H Stainless Steel

  • Higher creep stress and rupture properties when compared with 304
  • Ideal for high temperature service
  • Overcomes sensitization and intergranular corrosion concerns
  • Can be used in elevated temperature applications for ASME Boiler and Pressure Vessel Code applications
  • Due to stabilisation the material offers better overall corrosion resistance when compared to 304/304L
  • Excellent mechanical properties
  • A high carbon version (347H) is also available


Typical Uses

  • Heat exchangers
  • High temperature steam service
  • High temperature chemical process


Both 347/347H are used primarily in elevated temperature applications.

Product Range

Specifications: ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790
Sizes (Seamless): 1/2" NB - 24" NB
Sizes (ERW): 1/2" NB - 24" NB
Sizes (EFW): 6" NB - 100" NB


Wall Thickness available:
Schedule 5S - Schedule XXS (heavier on request)

Other Materials Testing:

NACE MR0175, H2 SERVICE, OXYGEN SERVICE, CRYO SERVICE, etc.

Dimensions:

All Pipes is manufactured and inspected/tested to the relevant standards including ASTM, ASME and API etc.


Why ChoosE Prosaic Steel and Alloys for Stainless Steel 347, 347H, UNS S34700, UNS S34709, WNR 1.4550, WNR 1.4961 Pipes & Tubes?

  1. Short Delivery Times – We are the quickest when it comes to servicing our customers with high quality stainless steel 347/347H pipes and tubes.
  2. Custom Sizes: We can process stainless steel 347/347H pipes and tubes to produce and supply either standard or non-standard stainless steel pipes.
  3. Best Prices: Our prices for stainless steel 347/347H pipes are competitive.
  4. Quality Products: We make sure that our quality of SS 347/347H pipes and tubes are compromised at any cost.
  5. Complete Certification: Our products are supplied with complete certification Mill TC, Test Reports from NABL approved Labs, Hydro Testing.
  6. Pipe Fittings and Flanges: We are a manufacturer of 347/347H forged pipe fittings, 347/347H butt weld pipe fittings, 347/347H compression ferrule fittings, and 347/347H flanges, offering our customers the convenience to purchase all their requirements from one vendor.
  7. Complete Documentation: For our overseas customers in the Middle East, GCC region, South Amercia and the African region we offer our SS 347/347H grade materials with all documents including Invoice, Packing List, Mill Test Certificates, Certificate of Origin and Bill of Lading


Stainless Steel 347, 347H, UNS S34700, UNS S34709, WNR 1.4550, WNR 1.4961 Pipes and Tubes Available Product Forms

  1. SS 347/347H Welded and Seamless Tubes, Pipes
  2. SS 347/347H Hydraulic and Instrumentation Tubes
  3. SS 347/347H Coiled Tubing
  4. SS 347/347H Capillary Tubes
  5. SS 347/347H Seam Welded and Cold Redrawn Pipe and Tubes
  6. SS 347/347H Seam Welded, Cold Redrawn and Annealed Pipes and Tubes


347/347H Stainless Steel Pipes, 347/347H Stainless Steel Tubes Value Added Processing Services

  1. 347/347H Stainless Steel Pipe Polishing
  2. 347/347H Stainless Steel Pipe Beveling
  3. Heat Treatment, Annealing, Pickling of SS 347/347H ERW, Seamless Pipes
  4. Ultrasonic Testing of SS 347/347H Pipes
  5. 100% X-Ray Welding for 347/347H Large Diameter Custom Size Stainless Steel Pipes
  6. Drawing Services
  7. Special Testing Requirements Destructive Testing, Non Destructive Testing etc.


Production, Supply, Stock Range of Stainless Steel 347, 347H Pipes and Stainless Steel 347H Tubes

Outside Diameter: 6.00 mm OD up to 250 mm OD, Sizes up to 12 NB available Ex-stock, OD Size Steel Tubes available Ex-stock

Thickness Range: 0.3mm 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS

Type: Seamless / ERW / Welded / Fabricated / CDW

Form: Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, U Shape, Pan Cake Coils, Hydraulic Tubes

Length: Single Random, Double Random & Required Length End: Plain End, Beveled End, Treaded

End Protection: Plastic Caps | Outside Finish: 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements

Delivery Condition: Annealed and Pickled, Polished, Bright Annealed, Cold Drawn

Inspection, Test Reports: Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports

Packing: Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests

Specials: Sizes and Specifications other than above can be manufactured on request

Markings on the Stainless Steel 347, 347H, UNS S34700, UNS S34709, WNR 1.4550, WNR 1.4961 Seamless/Welded Pipes


The full identification of the pipe should be continuously marked down its whole length, including:

  1. Nominal Pipe Size (Nominal Bore)
  2. Schedule (Wall Thickness)
  3. Specification
  4. Grade
  5. Method of Manufacture (Seamless or Welded)
  6. Heat Number
  7. Manufacturers Name or Symbol


General Properties of ASTM A312 TP 347 / 347H Stainless Steel Pipes and Tubes

Alloys 321 (S32100) and 347 (S34700) are stabilized stainless steels which offer as their main advantage an excellent resistance to intergranular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 to 15000F (427 to 8160C). Alloy 321 is stabilized against chromium carbide formation by the addition of titanium. Alloy 347 is stabilized by the addition of columbium and tantalum.

While Alloys 321 and 347 continue to be employed for prolonged service in the 800 to 15000F (427 to 8160C) temperature range, Alloy 304L has supplanted these stabilized grades for applications involving only welding or short time heating.

Alloys 321 and 347 stainless steels are also advantageous for high temperature service because of their good mechanical properties. Alloys 321 and 347 stainless steels offer higher creep and stress rupture properties than Alloy 304 and, particularly, Alloy 304L, which might also be considered for exposures where sensitization and intergranular corrosion are concerns. This results in higher elevated temperature allowable stresses for these stabilized alloys for ASME Boiler and Pressure Vessel Code applications. The 321 and 347 alloys have maximum use temperatures of 15000F (8160C) for code applications like Alloy 304, whereas Alloy 304L is limited to 8000F (4260C).

High carbon versions of both alloys are available. These grades have UNS designations S32109 and S34709.

Chemical Composition of ASTM A312 TP 347 / 347H Stainless Steel Pipes and Tubes

Represented by ASTM A240 and ASME SA-240 specifications.

Grade
C
Mn
Si
P
S
Cr
Ni
Co + Ta
347
0.08 max.
2.00 max.
0.75 max.
0.045 max.
0.03 max.
17.0 19.0
9.0-13.0
10 x C min.
(1.00 max.)
347H
0.04 0.10
2.00 max.
0.75 max.
0.045 max.
0.03 max.
17.0 19.0
9.0-13.0
8 x C min.
(1.00 max)

Resistance to Corrosion of ASTM A312 TP 347 / 347H Stainless Steel Pipes and Tubes

General Corrosion
Alloys 321 and 347 offer similar resistance to general, overall corrosion as the unstabilized chromium nickels Alloy 304. Heating for long periods of time in the chromium carbide precipitation range may affect the general resistance of Alloys 321 and 347 in severe corrosive media.

In most environments, both alloys will show similar corrosion resistance; however, Alloy 321 in the annealed condition is somewhat less resistant to general corrosion in strongly oxidizing environments than annealed Alloy 347. For this reason, Alloy 347 is preferable for aqueous and other low temperature environments. Exposure in the 8000F to 15000F (4270C to 8160C) temperature range lowers the overall corrosion resistance of Alloy 321 to a much greater extent than Alloy 347. Alloy 347 is used primarily in high temperature applications where high resistance to sensitization is essential, thereby preventing intergranular corrosion at lower temperatures.

Physical Properties of ASTM A312 TP 347 / 347H Stainless Steel Pipes and Tubes

The physical properties of Types 321 and 347 are quite similar and, for all practical purposes, may be considered to be the same. The values given in the table may be used to apply to both steels.

When properly annealed, the Alloys 321 and 347 stainless steels consist principally of austenite and carbides of titanium or columbium. Small amounts of ferrite may or may not be present in the microstructure. Small amounts of sigma phase may form during long time exposure in the 10000F to 15000F (5930C to 8160C) temperature range.

The stabilized Alloys 321 and 347 stainless steels are not hardenable by heat treatment.

The overall heat transfer coefficient of metals is determined by factors in addition to thermal conductivity of the metal. In most cases, film coefficients, scaling, and surface conditions are such that not more than 10 to 15% more surface area is required for stainless steels than for other metals having higher thermal conductivity. The ability of stainless steels to maintain clean surfaces often allows better heat transfer than other metals having higher thermal conductivity.

Mechanical Properties of ASTM A312 TP 347 / 347H Stainless Steel Pipes and Tubes

Room Temperature Tensile Properties
Minimum mechanical properties of the stabilized Alloys 321 and 347 chromium-nickel grades in the annealed condition (20000F [10930C], air cooled) are shown in the table.
elevated Temperature Tensile Properties
Typical elevated temperature mechanical properties for Alloys 321 and 347 sheet / strip are shown below. Strength of these stabilized alloys is distinctly higher than that of non-stabilized 304 alloys at temperatures of 10000F (5380C) and above.

High carbon Alloys 321H and 347H (UNS32109 and S34700, respectively) have higher strength at temperatures above 10000F (5370C). ASME maximum allowable design stress data for Alloy 347H reflects the higher strength of this grade in comparison to the lower carbon Alloy 347 grade. The Alloy 321H is not permitted for Section VIII applications and is limited to 8000F (4270C) use temperatures for Section III code applications.

Heat Treatment of ASTM A312 TP 347 / 347H Stainless Steel Pipes and Tubes

The annealing temperature range for Alloys 321 and 347 is 1800 to 20000F (928 to 10930C). While the primary purpose of annealing is to obtain softness and high ductility, these steels may also be stress relief annealed within the carbide precipitation range 800 to 15000F (427 to 8160C), without any danger of subsequent intergranular corrosion. Relieving strains by annealing for only a few hours in the 800 to 15000F (427 to 8160C) range will not cause any noticeable lowering in the general corrosion resistance, although prolonged heating within this range does tend to lower the general corrosion resistance to some extent. As emphasized, however, annealing in the 800 to 15000F (427 to 8160C) temperature range does not result in a susceptibility to intergranular attack.For maximum ductility, the higher annealing range of 1800 to 20000F (928 to 10930C) is recommended.


ASTM A312 TP 347 / 347H Stainless Steel Pipes, Tube Stock and Supply Range

Sr. No. Product Description Outside Diamter, OD (in mm) Wall Thickness, WT (in mm)
1 347/347H Stainless Steel Round Pipe/Tube 6mm 630mm 0.5mm-30mm
2 347/347H  Stainless Steel Square Pipe/Tube 12.7mm* 12.7mm to 300mm* 300mm 0.5mm-30mm
3 347/347H  Stainless Steel Rectangular Pipe/Tube 10*20mm to 100*200mm 0.5mm-30mm
4 347/347H  Stainless Steel Colour Coated Pipe/Tube 6mm to 630mm 0.5mm-30mm
5 347/347H  Stainless Steel Ornamental Tubes 12.7mm to 76.2mm 0.5mm-2.0mm
6 347/347H  Stainless Steel Electropolished Pipes/Tubes 12.7mm to 250mm 0.5mm-30mm
7 347/347H  Stainless Steel Slot Round Pipe/Tube 12.7mm to 76.2mm 0.5mm-2.0mm
8 347/347H  Stainless Steel Triangle Tube 16mm to 85mm 0.5mm-3.0mm
9 347/347H  Stainless Steel Hexagonal Tube 13mm to 85mm 0.5mm-2.0mm
10 347/347H  Stainless Steel Handrail Tube   0.5mm-2.0mm
11 347/347H  Stainless Steel U Shaped Tube 20mm to 200mm 0.5mm-2.0mm
12 347/347H  Thin-Wall Stainless Steel Tube 22mm*0.7mm to 108mm*2.0mm 0.5mm-2.0mm
13 347/347H  Inner/Outside Polished Stainless Steel Tube, Pipes 12.5mm to 203.2mm 1.0mm 5mm
14 347/347H Stainless Steel Capillary Tube 0.28mm to 10mm 0.08mm 1.2mm
15 347/347H  Stainless Steel Seamless Tube 6mm to 430mm 0.8mm 30mm

ASTM A312 TP 347 / 347H Stainless Steel Pipe and Tube Packing347 Stainless Steel Seamless Pipes and Tubes is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. SS 347 ASTM A312 Seamless Pipe packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock


Types of Packaging:

  • - Bundles (hexagonal)
  • - Wooden Boxes
  • - Crates (steel/wooden)
  • - Special crates for U-Bend tubes with each radius separated
  • - Packaging for SS 347 ASTM A312 Seamless Pipe as per customer's requirements


Special Features:

  • - Each bundle covered with plastic for protection against extreme weather.
  • - End of SS 347 ASTM A312 Seamless Pipe protected by plastic caps.
  • - Bundles strapped with plastic strips.
  • - Each radius of U-Bend tube separated by a separator.
  • - Packaging list (laminated) placed with box/crate.


ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipe Sizes Available in Stock with Price

  • 1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3/4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1-1/4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 1-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 2-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 3-1/2" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 4" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 5" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 6" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 8" NB in ThicknessSchedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 10" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 12" NB in ThicknessSchedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 14" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 16" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS
  • 18" NB in Thickness Schedule 10, Schedule 40, Schedule 80, Schedule 160, Schedule XXS


ASTM A312 TP 347 / 347H Stainless Steel Seamless Tube Sizes in Thickness SWG/BWG Available in Stock with Price

  • 1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 5/16" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3/8" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 1-3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-1/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 2-3/4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 3-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 4" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 4-1/2" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge
  • 5" OD in Thickness 10 Gauge, 12 Gauge, 14 Gauge, 16 Gauge, 18 Gauge, 20 Gauge, 22 Gauge


We export ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipe and Tube to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Prosaic Steel and Alloys is a well known worldwide exporter of ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes and Tubes, Prosaic Steel and Alloys is committed to provide each and every customer with the highest standard of customer service. We deals in ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes and Tubes in India & Overseas, offering a wide range of ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipes and Tubes.


We Keep Stock:



PRODUCTS




LOCATION
Prosaic Steel and Alloys
429, Pathe Bapurao Marg, Ahmed Building, Opp Islampura Street, Mumbai- 400004
Maharashtra INDIA
Telephone: +91 022 23874482 / +91 022 6659 5367
elephone: +91 022 23874482 / +91 022 6659 5367

Email: [email protected]
Website: www.prosaicsteel.com


We export to:

Savoy Piping Inc - API 5L grade B, X42, X46, X52, X56, X60, X65, A333 Grade 3, 6, A106 Grade C, A671 CC60, CC65, CC70, A672, A335 P5, P9, P11, P22, P91, A358 304, 316L, 310, 321, 347, A312 Pipes

ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Mumbai, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Navi Mumbai, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Pune, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Coimbatore, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Chennai, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Delhi, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Ahmedabad, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Tarapur, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Nasik, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Nagpur, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Jharkhand, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Chhattisgarh, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Kolkata, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Hyderabad, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Hubli, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Gujarat, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Maharashtra, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Kerela, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Andhra Pradesh, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Tamil Nadu, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Karnataka, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Banglore, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Bangaluru, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Cuttack, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Hissar, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Bhopal, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Manipur, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Manglore, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Bilaspur, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Bhillai, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Ankleshwar, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Calicut, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Cochin, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Kottayam, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Saudi Arabia, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Iran, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Qatar, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Oman, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Turkey, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Netherland, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Spain, ASTM A347 / 347H Stainless Steel Seamless Pipe and Tube Germany

Contact Prosaic Steel & Alloys today for ASTM A312 TP 347 / 347H Stainless Steel Seamless Pipe Competitive Quotation...
call : +91 88791 70590
e-mail:[email protected]

Follow On Us Best Pipe Supplier, Prosaic Steel and Alloys Facebook Page Best Pipe Supplier, Prosaic Steel and Alloys Linkedin Page Best Pipe Supplier, Prosaic Steel and Alloys Instagram Page Best Pipe Supplier, Prosaic Steel and Alloys Youtube Page


stainless steel pipe, carbon steel pipe, alloy steel pipe, duplex pipe, monel, inconel, hastelloy, titatnium, pipe dealer, supplier, exporter