ASME SA234 Alloys Steel Fittings

ASME SA234 WP5, ASME SA234 WP9, ASME SA234 WP11, ASME SA234 WP22, ASME SA234 WP91 in Class 1, 2, 3 and Types Seamless, Welded and Fabricated.

ASME SA234 Buttweld Pipe Fittings as per ANSI B16.9 in Types of 90 Degree Elbow Long Radius, 90 Degree Short Radius, 45 Degree Elbow Long Radius, 45 Degree Elbow Short Radius, 180 Degree Elbow, Equal Tee, Unequal Tee, Reducing Tee, Round Cap, Concentric Reducer, Eccentric Reducer, Stub Ends etc. Certified in India.

ASME SA234 Pipe Fitting, Stockholder Of ASME SA234 Tee, ASME SA234 Stub End Wholesaler, ASME SA234 Grade ASME SA234 Elbow, Best Price of ASME SA234 Pipe Cap Exporter, ASME SA234 Alloy Buttweld Pipe Fittings Traders in India.

  • What is ASME SA234 Butt weld Pipe Fittings
  • Standard Specification For ASME SA234 Pipe Fittings
  • Types Of ASME SA234 Buttweld Pipe Fittings
ASME SA234 WP5, WP9, WP11, WP22, WP91 Pipe Fittings
  • ASME SA234 Alloy Steel 45° Elbow
  • ASME SA234 Alloy Steel 90° Elbow
  • ASME SA234 Alloy Steel 180° Elbow
  • ASME SA234 Alloy Steel Equal Tee
  • ASME SA234 Alloy Steel Concentric Reducer
  • ASME SA234 Alloy Steel Eccentric Reducer
  • ASME SA234 Alloy Steel Long Radius Elbow
  • ASME SA234 Alloy Steel Short Radius Elbow
  • ASME SA234 Alloy Steel End Pipe Cap
  • ASME SA234 Alloy Steel Stub End
  • ASME SA234 Alloy Steel Cross
  • ASME SA234 Alloy Steel Reducing Tee
  • ASME SA234 Alloy Steel 3D Bend
  • ASME SA234 Alloy Steel 5D Bend

Prosaic Steel & Alloys has a uniqueduct portfolio that is engineered as a durable piping component, which is a sustainable alternative with premium quality, contributing to a businesses growth. We are a manufacturer, supplier and exporter of ASME SA234 Alloy Pipe Fittings that form meaningful connections between multiple pipes of various sizes. Our range of Alloy Steel Buttweld Fittings include all types of conventional as well as customised fittings compliant with ASME SA234, specification covering Alloy Steel fittings of welded and seamless construction, stated to use in the pressure piping systems and pressure vessel fabrication for operations at moderate to elevated temperatures.

Our ASME SA234 Alloy Steel Buttweld Fittings are indispensable to the oil and petroleum industry; these pipes do not support porosity as they are formed through a single metal body and can be trusted for critical transmission casses. Besides, ASME SA234 Chrome Moly Lap Joint Stub Ends which are re-usable and corrosion resistant andvide quick dismantling in the case of inspection. Also We offer wide range of Chrome Moly ASTM SA234 pipe fittings such as ASME SA234 tee, Alloy End Pipe Cap, ASME SA234 Reducer, ASME SA234 Cross, ASME SA234 elbow, ASME SA234 Stub ends etc.

Standard Specification For Chrome Moly ASME SA234 Alloy Steel Pipe Fittings

Specifications : ASTM A234 / ASME SA234

Dimensions : ASME/ANSI B16.9

Size : 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated)

Type : Seamless / Welded / Fabricated

Bending Radius : R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS or Custom Thickness upto 50 MM

Types of ASME SA234 WP5/9/11/22/91 Fittings Size
ASME SA234 WP5/9/11/22/91 Elbow – Long Radius ASME SA234 WP5/9/11/22/91 Stub Ends Sizes 1/2″ – 48″
ASME SA234 WP5/9/11/22/91 Elbow – Short Radius ASME SA234 WP5/9/11/22/91 Cross
ASME SA234 WP5/9/11/22/91 Reducing Elbow ASME SA234 WP5/9/11/22/91 Reducing Cross
ASME SA234 WP5/9/11/22/91 45° Elbow ASME SA234 WP5/9/11/22/91 Tees
ASME SA234 WP5/9/11/22/91 Fabricated Tee ASME SA234 WP5/9/11/22/91 End Cap
ASME SA234 WP5/9/11/22/91 Reducer ASME SA234 WP5/9/11/22/91 Seamless Fittings
ASME SA234 WP5/9/11/22/91 Concentric Reducer ASME SA234 WP5/9/11/22/91 Pipe Nipple
ASME SA234 WP5/9/11/22/91 Eccentric Reducer ASME SA234 WP5/9/11/22/91 5D Elbow
ASME SA234 WP5/9/11/22/91 3D Elbow ASME SA234 WP5/9/11/22/91 Welded Pipe Fittings

ASTM A234/A234M – 15
This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the latest revision of ASME B16.9, B16.11, MSS-SP-79, MSS-SP-83, MSS-SP-95, and MSS-SP-97. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. The M in the designation stands for metric.

Chemical Composition of ASME SA234 Alloy Butt weld Fittings

NOTE 1: All requirements are maximum unless otherwise indicated.
NOTE 2: Where an ellipsis (...) appears in this table, there is no requirement and analysis for the element need not be determined or reported.

Grade and
Carbon Manganese Phosphorus Max Sulphur Max Silicon Chromium Molybdenum Nickel Copper Other
WPB B, C, D, E, F 0.30 max 0.29–1.06 0.050 0.058 0.10 min 0.40 max 0.15 max 0.40 max 0.40 max Vanadium 0.08 max
WPC C , D ,E , F 0.35 max 0.29–1.06 0.050 0.058 0.10 min 0.40 max 0.15 max 0.40 max 0.40 max Vanadium 0.08 max
WP1 0.28 max 0.30–0.90 0.045 0.045 0.10–0.50 ... 0.44–0.65 ... ... ...
WP12 CL1,
WP12 CL2
0.05–0.20 0.30–0.80 0.045 0.045 0.60 max 0.80–1.25 0.44–0.65 ... ... ...
WP11 CL1 0.05–0.15 0.30–0.60 0.030 0.030 0.50–1.00 1.00–1.50 0.44–0.65 ... ... ...
WP11 CL2,
WP11 CL3
0.05–0.20 0.30–0.80 0.040 0.040 0.50–1.00 1.00–1.50 0.44–0.65 ... ... ...
WP22 CL1,
WP22 CL3
0.05–0.15 0.30–0.60 0.040 0.040 0.50 max 1.90–2.60 0.87–1.13 ... ... ...
WP5 CL1,
0.15 max 0.30–0.60 0.040 0.030 0.50 max 4.0–6.0 0.44–0.65 ... ... ...
WP9 CL1,
0.15 max 0.30–0.60 0.030 0.030 1.00 max 8.0–10.0 0.90–1.10 ... ... ...
WPR 0.20 max 0.40–1.06 0.045 0.050 ... ... ... 1.60–2.24 0.75–1.25 ...
WP91 0.08–0.12 0.30–0.60 0.020 0.010 0.20–0.50 8.0–9.5 0.85–1.05 0.40 max ... Vanadium 0.18–0.25
Columbium 0.06–0.10
Nitrogen 0.03–0.07
Aluminum 0.02 maxG
Titanium 0.01 maxG
Zirconium 0.01 maxG

(A) When fittings are of welded construction, the grade and marking symbol shown above shall be supplemented by letter "W”.

(B) Fittings made from bar or plate may have 0.35 max carbon.

(C) Fittings made from forgings may have 0.35 max carbon and 0.35 max silicon with no minimum.

(D) For each reduction of 0.01 % below the specified carbon maximum, an increase of 0.06 % manganese above the specified maximum will be permitted, up to a maximum of 1.65 %.

(E) The sum of Copper, Nickel, Chromium, and Molybdenum shall not exceed 1.00 %.

(F) Applies both to heat and product analyses.

Mechanical Properties of ASME SA234 Alloy Butt weld Pipe Fittings

Tensile strength, minimum unless a range is given ksi (MPa)60 (415)70 (485)60 (415)75 (520)90 (620)
Yield,strength, min ksi (MPa) (0.2% offset or 0.5% extension under-load)35 (240)40 (275)30 (205)45 (310)60 (415)


WPC, WP11, WP22
Longitundinal TransverseLongitundinal Transverse
round specimen, or small proportioanl specimen, min % in 4 D
22 14 20 13
Rectangular speicmen for wall thickness 5/16; and over, and
for all small sizes tested in full section; min % in 2 in.
3020 A
Rectangular speicimen for wall thickness less than 5/16;;
min % in 2 in (1/2; wide specimen)

A WPB and WPC fittings manufactured from plate shall have a minimum elongation of 17 %.

B For each 1⁄32 in. [0.79 mm] decrease in wall thickness below 5⁄16 in. [7.94 mm], a deduction of 1.5 % for longitudinal and 1.0 % for transverse from the values shown above is permitted

ASME SA234 WP91 Buttweld Fittings Different Products

ASME SA234 WP5 Alloy Steel Fittings ASME SA234 WP9 Alloy Steel Fittings
ASME SA234 WP11 Alloy Steel Fittings ASME SA234 WP22 Alloy Steel Fittings
ASME SA234 WP91 Alloy Steel Fittings Alloy Steel 1 1/4 Cr-1/2Mo Buttweld Tee
Alloy Steel WP91 Buttweld Reducer Suppliers ANSI WP91 Alloy Steel Pipe Fittings
Alloy Steel A234 WP91 Stubends Dealer ASME SA234 WP91 Pipe Fittings Exporter
Alloy Steel WP91 Butt weld Fittings Stockholder Steel WP91 Pipe End Cap Distributors
Alloy Steel WP91 45deg.Elbow A234 WP91 90deg. LR Elbow Manufacturer
Alloy Steel Grade WP91 Pipe Tee Alloy Steel ASME SA234 WP91 Cross
Alloy Steel WP91 Buttweld Reducing Nipple Alloy WP91 Short Radius Elbow
ANSI B16.9 ASME SA234 WP91 Buttweld Fitting A234 WP91 End Pipe Cap Stockist
ASME SA234 WP91 Welded Pipe Fittings Alloy Steel ASME SA234 WP91 Pipe Fittings

ASME SA234 Buttweld Pipe Fittings Application

ASME SA234 Pipe Fittings are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of ASME SA234 Alloy Steel Buttweld Pipe Fittings through a worldwide network of stock-keeping branches. These ASME SA234 Chrome Moly Buttweld Fittings is use in various industries like :

  • ASME SA234 Buttweld Pipe Fitting uses in Oil and Gas Pipeline
  • ASME SA234 Buttweld Pipe Fittings uses in Chemical Industry
  • ASME SA234 Pipe Fittings uses in Plumbing
  • Chrome Moly ASME SA234 Buttweld Pipe Fittings uses in Heating
  • ASME SA234 Alloy Steel Fittings uses in Water Supply Systems
  • ASME SA234 Buttweld Fittings uses in Power Plant
  • ASME SA234 Butt weld Pipe Fittings uses in Paper & Pulp Industry
  • ASME SA234 Buttweld Pipe Fittings uses in General Purpose Applications
  • ASME SA234 Chrome Moly Pipe Fittings uses in Fabrication Industry
  • ASME SA234 Chrome Moly Buttweld Fittings uses in Food Processing Industry
  • ASME SA234 Alloy Buttweld Pipe Fittings uses in Structural Pipe

People Also Searched For

A Wide Range Of the Best Quality WP91 Chrome Moly Pipe Fittings, Chrome Moly Fittings, Chrome Moly pipe fittings price list, Chrome Moly Chrome Moly Pipe Fittings, a234 wP91 chemical composition, sa234 material, sa234 wpb material specification, a234 wP91, a234 wP91 fittings, wP91 material, ASME SA234 wP91, a234 WP91 elbow price, Chrome Moly pipe fittings manufacturers in india, Chrome Moly wP91 elbow dimensions, alloy WP91 elbow price, schedule 10 a234 WP91 Fittings, Chrome Moly WP91 Schedule 40 pipe fittings, Chrome Moly WP91 weldable pipe fittings, buy Chrome Moly WP91 pipe fittings, Top Quality Chrome Moly WP91 Reducer, ASME SA234, Special Chrome Moly WP91 Pipe Fittings, High quality Chrome Moly pipe fittings Manufacturers, ANSI WP91 Chrome Moly pipe fittings, 6 inch welded Chrome Moly WP91 pipe fittings, Competitive Price Factory Customized Chrome Moly WP91 Pipe Fittings, Elbow 90 Degree Manufacturer, Supplier in India.

ASME SA234 Buttweld Fittings Export Countries

We export ASME SA234 Alloy Steel Buttweld Fittings to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, Israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Prosaic Steel and Alloys is a well known worldwide exporter of Chrome Moly Chrome Moly Fittings, Prosaic Steel and Alloys is committed to provide each and every customer with the highest standard of customer service. We deals in ASME SA234 Alloy Buttweld Fittings in India & Overseas, offering a wide range of ASME SA234 Alloy Pipe Fittings

Prosaic Steel and Alloys is Leading Manufacturer, Distributor, Exporter, Stockholder and Supplier of ASME SA234 Alloy Buttweld Fittings in United States of America (USA), Saudi Arabia, Italy, Netherlands, Germany, Canada, Singapore, Malaysia, Indonesia