Introduction of ASME SA516 Grade 65 Boiler Quality Steel Plate

The ASME SA516 Grade 65 steel plate is a medium carbon alloy used extensively in the fabrication of pressure vessels and boilers. Known for its robust performance under pressure and high temperatures, it is part of the SA516 standard, which includes other grades such as 55, 60, and 70. The "65" denotes its minimum tensile strength in ksi (kilopounds per square inch), making it an ideal material for high-stress applications.

SA 516 GR. 65 plate is the very good weldable carbon steel choice for the boiler fabrications and pressure vessels. The material is providing very good performance at the low than the elevated temperature services. It is having very good weldability property and good notch toughness.

Prosaic Steel and Alloys India Manufacturer & Fabricator, Importer, Stockholder, ASME SA516 GRADE 65, premier suppliers of bulk Boiler Quality Steel Plates. ASME SA516 GRADE 65. We Stock worldwide. Fast delivery guaranteed for every size Boiler Quality Steel Plates ASME SA516 GRADE 65. ASME SA516 GRADE 65 Boiler Quality Steel Plates, largest range of Boiler Quality Steel Plates ASME SA516 GRADE 65 Boiler Quality Steel Plates Suppliers in India and ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA515 Grade 65, is 2002 GR. 1 / GR. 2, BS 1501, DIN 17155, Steel Plates, HIC Plates, ASTM A516 Grade 65 Circle, ASTM A516 Grade 65 Ring, ASTM A516 Grade 65 Blank and ASME SA516 GRADE 65 | ASTM A516 Grade 65 - Pressure Vessel Steel Plates and Boiler Quality Steel Plates

Overview of ASME SA516 Grade 65 Boiler Quality Steel Plate

Pressure Vessel Plates, Carbon Steel, for Moderate and Lower-Temperature Service to ASTM A 516/ A 516M Standard and ASTM A 516 or ASME SA 516 grade is one of the most popular steel grades and It is primarily intended for use in welded pressure vessels where notch toughness is important. These grades cover a range of tensile strengths from 55 - 90 MPa and this versatility explains much of the specifications popularity and For plates thinner than 40mm normally supply as rolled. Plates above 40mm thick are normalised. For SA516 Grade 65, which is one of most popular steels, the ASME standard composition is as follows (dependent on grade)

ASME S516 specification steel is used throughout the oil and gas, chemical and power generation industry and can be tested to exceed your specified requirements. HIC Testing is one such requirement as this material is used commonly in sour service/ wet h2s corrosive environments and so knowing how susceptible the material will be to hydrogen sulphide corrosion is imperative The A516 / SA516 standard, its full name is "Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service”, is widely used by designers and engineers in many market sectors particularly outside of Europe. You may also see the following variations

Chemical Composition of 65 Boiler Quality Steel Plate

The composition of ASME SA516 Grade 65 steel includes

• Carbon (C): 0.24% maximum
• Manganese (Mn): 0.85-1.20%
• Phosphorus (P): 0.025% maximum
• Sulfur (S): 0.025% maximum
• Silicon (Si): 0.15-0.40%

These properties are verified through rigorous testing methods, including tension tests and impact tests, to ensure the material meets stringent safety and performance standards

Applications of 65 Boiler Quality Steel Plate

ASME SA516 Grade 65 steel plates are primarily used in:

• Pressure Vessels: Suitable for storing gases and liquids under pressure.
• Heat Exchangers: Employed in systems requiring efficient heat transfer under high pressure.
• Boilers: Used in the construction of industrial boilers where high-pressure steam and thermal stress are common.
• Reactors: Ideal for chemical and petrochemical reactors due to its durability and resistance to stress corrosion.

Did You Know How Many Advantages of 65 Boiler Quality Steel Plate ?

High Strength Capable of withstanding high pressure and temperature and Good Weldability Allows for easy fabrication and welding without compromising structural integrity and Excellent Toughness Maintains performance at low temperatures, reducing the risk of brittle failure and Versatility: Adaptable for a wide range of industrial applications, including energy, chemical, and petrochemical industries.

ASME SA516 Grade 65 Standard steel plates are intended for use in pressure vessels where increased Strength is is important ASTM A516 Grade 65 steel is one of the most popular steels for Boilers, pressure vessels and heat exchangers. It is excellent at low temperature and have good results on standard Charpy V Notch toughness tests. A516 70 is according to the ASTM standard A516/A516M We have an extensive stock of A516 Grade 70 plates of all thicknesses and dimensions – especially thicker plates – making it easy to find exactly the plates that you are looking for.

We can supply

• Thickness from 3mm to 150mm
• Width: from 1,500mm to 2,500mm
• Length: from 6,000mm to 12,000mm

Technical conditions

• Ultrasonic tested as per SA 578 or any other as per requirement
• MTC acc to EN 10204 / 3.2
• Charpy Impact tested at -20°C / -29°C / - 46°C
• Heat Treatment : Rolled / Normalised / N+T QT
• BQ Plates with IBR form IV
• Production: Hot Rolled

Standards and Certifications of 65 Boiler Quality Steel Plate

Compliance with ASME standards ensures that SA516 Grade 65 steel plates meet the necessary specifications for safety and quality. Manufacturers typically provide certifications confirming adherence to these standards, along with detailed test reports.

Conclusion

ASME SA516 Grade 65 steel plates are essential materials in the construction of pressure vessels and boilers. Their chemical composition, mechanical properties, and adherence to ASME standards make them reliable choices for industries requiring robust performance under high-pressure conditions.

ASME SA516 Grade 65 - Chemical Composition

The chemical composition of ASTM A516 Grade 60 and ASME SA516 Grade 65 Carbon Steel plate is listed.
Typical Chemical Composition of ASTM A516 Grade 65/ASME SA516 Grade 65.

ASME SA516 Grade 65 - Mechanical Properties

The mechanical properties of ASTM A516 Grade 65 and ASME SA516 Grade 65 carbon steel plate are outlined.
Typical Mechanical Values of ASTM A516 Grade 65/ASME SA516 Grade 65.

A516 Grade 65 Equivalent Grades

Normally the following steel grades are considered equivalent to ASTM/ASME A/SA516 Gr 60. In the US it is also known as PVQ516

• P265GH to EN10028-3
• BS1501 161 430 A/B
• BS1501 151 400 A/B
• DIN 17155 HII
• NF A42 CP
• NF A42 AP
• SS1430-01
• SS1431-01
• SS1432-01

SA516 Grade 65 Steel Suplementary Requirements

The following supplementary requirements from ASTM A20 can be met by A 516:

• S1 – Vacuum treatment
• S2 – Product Analysis
• S3 – Simulated Post Weld Heat Treatment
• S4.1 – Additional Tensile Test
• S5 – Impact Test (Charpy Notch)
• S6 – Dropweight Test
• S7 – Hot Tensile Test
• S8 – UT (Ultrasonic Testing) to A435
• S9 – Magnetic Particle Examination
• S11 – UT to A577
• S12 – UT to A578
• S17 – Vacum Carbon Deoxidised Steel

Uses of ASTM A516 Grade 65 Plates

A significant quantity of ASTM A516 Grade 65 boiler quality plate is used by pressure vessel manufacturers and fabricators making process equipment for the oil and gas industry. Some is also used for skid mounted pressure vessels and modules on production platforms and much is used in refineries and downstream processes.

Reliability of ASTM A516 Grade 65 Plates

Reliability is critical when you are fabricating a large pressure vessel. If you have to import pressure vessel plate from overseas and then find a defect in it you are faced with difficult decisions. Focusing on plates from mills with a great reputation for quality – and which the end user knows well – helps reduce the production risk.

Our experience is that ASTM A516 Gr 65 plates and BQ Plates from German steel mills are more reliable and there are fewer defects – especially when the plates get thicker. For some companies purchasing German steel is like an insurance policy, but it helps prevent things going wrong to start with.

Along with the improved reliability there are also a range of other small benefits over steels from other origins. These include better physical and chemical characteristics – so that when the plates are retested the risk of them failing a test is far lower. Plates also often come with improved toughness and weldability etc.

Availability of ASTM A516 Grade 65 Plates

We believe that when our customers require ASTM A516 Grade 65 plates on an ex-stock basis they don’t want to have to buy plates from several different places. So we have one of the largest stocks of ASTM A516 Grade 60 steel plates and Metal Plates in Northern Europe to ensure that in most cases we are able to deliver all your requirements on an ex-stock basis.

For most standard stock thicknesses we have a good range of A516 grade 65 plate dimensions available so that even if you require 20 or 30 plates we can manage the possibilities for you. One of the difficult issues in fabricating boilers and Pressure Vessel when the steel plates are not available locally is making the trade off between increased welding and plate width. As plates get wider delivery becomes slower because they can’t go on container vessels. We have options at 2m, 2.5m and 3m enabling you to match your production schedule to the optimum choice of A516 65 plate. Pressure Vessel Plate or Boiler Plate?

we make a distinction between Boiler Plates and pressure vessel plates. Some other steel plate companies class everything as pressure vessel plate: there is no right and wrong about this.

The most important thing to know as a potential customer of Prosaic Steel is that we stock, process, and distribute all of the popular grades of Boiler and Pressure Vessel specifications like ASTM A516, ASME SA516, EN 10028-3, and BS 1501. You may call the steel whatever you want and leave us to worry about matching our stocks to your requirements.

ASTM A516 GRADE 60/65 HIC TESTED STEEL PLATES

HIC (Hydrogen Induced Cracking) is the result of a corrosive reaction between carbon steel and hydrogen sulphide. Wet hydrogen sulphide (H2S) cracking in steel has been a problem in petroleum refining and upstream oil and gas processing since the 1950s. Working conditions where wet H2S prevails are often described as sour service conditions and the term sour gas can be also be used in this context. As more fields rich in H2S are exploited, and this is increasingly the case, the problem is increasingly significant for equipment fabricated in potentially sensitive carbon-manganese (C-Mn) steels.

Steel in contact with water containing H2S will corrode producing hydrogen at its surface. H2S not only inhibits the formation of hydrogen gas, so reducing the opportunity for it to escape, but promotes its absorption in to the steel. At typical working temperatures below 200 degrees Celsius hydrogen atoms can become trapped causing embrittlement and ultimately cracking.

The use of steel pressure vessels in industries such as oil and gas processing requires a robust steel which is resilient to the long term corrosive effects of hydrogen sulphide in sour service applications. In order to provide better H2S resistance the Properties of C-Mn steels have been progressively developed to improve chemistry, cleanliness, homogeneity, and microstructure

ASTM A516 Grade 65 With HIC Resistance

We also offer the Dicrest range of HIC resistant Boiler Plate from Essar Steel India. These plates are triple certified to ASME SA516 grade 60, 65 and 65 are some of the best HIC steel on the market for sour service application. We keep large quantities in stock with the maximum thickness normally available being 100 mm.

ASME SA516 Grade 65 Steel Plate Packing

ASME SA516 Grade 65 is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. ASME SA516 Grade 65 Steel Plate and Steel Sheets packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock

Types of Packaging:

• - Bundles (hexagonal)
• - Wooden Boxes
• - Crates (steel/wooden)
• - Special crates for U-Bend tubes with each radius separated
• - Packaging for SS SA516 Grade 65 Steel Plate ASME SA516 as per customer's requirements

Special Features:

• - Each bundle covered with plastic for protection against extreme weather.
• - End of ASME SA516 Grade 65 Steel Plate protected by plastic Strip.
• - Bundles strapped with plastic strips.
• - Each radius of U-Bend tube separated by a separator.
• - Packaging list (laminated) placed with box/crate.

ASME SA516 Grade 65 / ASTM A516 Grade 65 Plate Steel Sizes Available in Stock with Price

• 0.2 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 0.3 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 0.4 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 0.8 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 1 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 1.65 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 2.11 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 3.1 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 04 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 05 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 06 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 08 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 10 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 12 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 15 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 16 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 18 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 20 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 22 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 25 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 28 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 30 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 32 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 35 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 36 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 38 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 40 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 42 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 45 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 50 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 52 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 65 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 62 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 65 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 65 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 80 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 90 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 100 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 110 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 120 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates
• 120 MM THICKNESS x WIDTH 1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6500 MM / COIL CUT in ASME SA516 Grade 65, ASTM A516 Grade 65, ASME SA516 Grade 65 HIC Resistant, ASTM SA516 Grade 65 HIC Resistant Boiler Quality Steel Plates

ASME SA516 Grade 65 Boiler Quality Steel Plate Export Country

We export ASME SA516 Grade 65 Boiler Quality Steel Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Prosaic Steel and Alloys is a well known worldwide exporter of ASME SA516 Grade 65 Boiler Quality Steel Plates and Boiler Sheet is committed to provide each and every customer with the highest standard of customer service. We deals in ASME SA516 Grade 65 / ASTM A516 Grade 65 Boiler Quality Steel Plates in India & Overseas, offering a wide range of ASME SA516 Grade 65 / ASME SA516 Grade 65 Boiler Quality Steel Plates