HIC Resistant Steel Plates HIC Tested

Introduction of HIC Resistant Steel Plates HIC Tested

HIC Resistant Steel is carbon steel which is tested to demonstrate the plate's resilience to the long term effects of hydrogen induced cracking, tested according to NACE.

HIC-resistant steel is specially designed to withstand the detrimental effects of hydrogen absorption and prevent cracking. These steels are critical in industries where the risk of exposure to hydrogen sulfide is high. Their development and usage are vital to ensure the safety and longevity of infrastructure and equipment.

HIC Resistant Steel Plates HIC Tested

Overview of HIC Resistant Steel Plates HIC Tested

HIC Resistant Steel Plate is used by boiler makers and fabricators when Hydrogen Induced Cracking is a big risk and HIC (Hydrogen Induced Cracking) is the result of a corrosive reaction between carbon steel and hydrogen sulphide. Wet hydrogen sulphide (H2S) cracking in steel has been a problem in petroleum refining and upstream oil and gas processing since the 1950s. Working conditions where wet H2S prevails are often described as sour service conditions and the term sour gas can be also be used in this context. As more fields rich in H2S are exploited, and this is increasingly the case, the problem is increasingly significant for equipment fabricated in potentially sensitive carbon-manganese (C-Mn) steels

Steel in contact with water containing H2S will corrode producing hydrogen at its surface. H2S not only inhibits the formation of hydrogen gas, so reducing the opportunity for it to escape, but promotes its absorption in to the steel. At typical working temperatures below 200 degrees Celsius hydrogen atoms can become trapped causing embrittlement and ultimately cracking The use of steel pressure vessels in industries such as oil and gas processing requires a robust steel which is resilient to the long term corrosive effects of hydrogen sulphide in sour service applications. In order to provide better H2S resistance the properties of C-Mn steels have been progressively developed to improve chemistry, cleanliness, homogeneity, and microstructure

Characteristics of HIC Resistant Steel Plates

  • Fine Grain Structure: Enhanced toughness and strength.
  • High Purity Levels: Reduced levels of impurities such as sulfur and phosphorus.
  • Low Carbon Equivalent: Improved weldability and reduced risk of cold cracking.
  • Controlled Inclusion Shape: Modified non-metallic inclusions to minimize crack initiation points.

HIC steel plate, manufactured by Essar Steel, and supplied from stock by Prosaic Steel and Alloys represents the pinnacle of that development with the use of an electric arc furnace, ladle refining, and vacuum degassing producing a homogenous, ultra clean steel suitable for use in sour service applications The most common grades of HIC resistant steel plate is A516 – to ASME/ASTM standards. It will generally be certified to grades 60, 65 and 70 so one plate can meet the requirements for any of the three grades A516 60/65/70 + HIC.

Once the A516 plate is produced a sample is then tested to see if it meets the required of TM0284, with is the NACE standard for the Evaluation of Pipeline and Pressure Vessel Steels for Resistance to Hydrogen-Induced Cracking, using one of two test solutions. In simplistic terms these are acidic solutions that mimic the corrosive effects of the conditions that induce HIC Cracking. The steel stays in the solution for a few days and then it is examined under a microscope and the cracks that have formed are recorded

Do You Know What is the HIC Resistant Steel Plates?

HIC resistant steel plate is a type of steel plate used in the construction of high-grade structures. The plates are designed to be resistant to hydrogen-induced cracking (HIC), and this type of plate is used in applications where the exposure of the metal to hydrogen can pose a severe risk.

A516 is the most widely used grade for HIC resistant steel plate according to ASME/ASTM standards. Typically one panel will meet the requirements of grades 60, 65, and 70, fulfilling all three classifications of A516 60/65/70 + HIC. Carbon steels capable of withstanding hydrogen induced cracking are NACE tested for long-term resistance to this phenomenon. The steel is left in the solution for several days and then examined under a microscope to observe any corrosion caused by the conditions that would cause HIC cracking.

We can supply HIC Resistant Steel Plates HIC Tested

  • Thickness from 5mm to 150mm
  • Width: from 1,500mm to 2,500mm
  • Length: from 6,000mm to 12,000mm

HIC Testing of HIC Resistant Steel Plates HIC Tested

To ensure the steel’s resistance to HIC, specific testing is conducted. HIC testing and SSC Testing involves subjecting the steel plates to simulated service environments and assessing the degree of cracking and blistering. The typical tests include

  • Ultrasonic Testing: Non-destructive testing to detect internal flaws.
  • Microstructural Analysis: Examination of the steel’s microstructure to identify any potential issues.
  • NACE TM0284: Standard test method for evaluation of pipeline and pressure vessel steels for resistance to hydrogen-induced cracking.

Technical conditions of HIC Steel Plates

  • Ultrasonic tested as per SA 578 or any other as per requirement
  • MTC acc to EN 10204 / 3.2
  • Charpy Impact tested at -20 / - 46 Degc.
  • Furnace Normalised
  • BQ Plates with IBR form IV

The Following HIC Resistant Steel Plates Grades Are Available:

  • ASTM A516 Grade 60 HIC Tested
  • ASTM A516 Grade 65 HIC Tested
  • ASTM A516 Grade 70 HIC Tested
  • ASME SA516 Grade 60 HIC Tested
  • ASME SA516 Grade 65 HIC Tested
  • ASME SA516 Grade 70 HIC Tested

Hydrogen Induced Cracking (HIC) in the Oil and Gas Industry

Particularly common to the Oil and Gas Industry where the use of steel pressure vessels is widespread, the risk of this should be considered when hydrogen sulphide partial pressure becomes greater than 3.5mbar. Carbon steel Pressure Vessel should not be affected by HIC damage where H2S levels are lower than this figure in a normal service life cycle. HIC is prevalent in wet H2S environments, which is often known as sour service and such cracking over a prolonged period of time without inspection, will reach a critical point and the steel component i.e. pressure vessel, could easily fail.Simply put, Hydrogen Induced Cracking damage increases as the level of hydrogen sulphide increases.

Stress-Orientated Hydrogen Induced Cracking (SOHIC)

Susceptibility to hydrogen blistering and hydrogen induced cracking can be apportioned to the quality of the steel plate used. Another type of hydrogen corrosion, Stress-Orientated Hydrogen Induced Cracking (SOCHIC), is normally found in the base metal adjacent to the weld, where the stress point is Strength highest due to the internal pressure of the vessel and the stress on the weld point itself. HIC and SOCHIC can also be found in steel pipework. This represents a major problem for the oil and gas industry - it is no coincidence that many facilities employ dedicated corrosion engineers who rigorously inspect pressure vessels for signs of wear and corrosion. Prosaic Steel and Alloys are experts in the supply of the highest quality HIC tested carbon steel plate for pressure vessels and Boilers and have a stockholding at their India distribution warehouse

Why Choose Hydrogen Induced Cracking Tested Steel Plate?

Prosaic Steel and Alloys supply HIC tested steel plate to high end customers in the Oil ,Gas and Petrochemical Sectors. These customers demand the highest standards in terms of quality, durability and performance

Do you Know How Many Economic Benefits of Hydrogen Induced Cracking Tested Steel Plate ?

HIC tested steel plate is the ideal choice for pressure vessels and Boiler Plate in this particular market as it is tested for resistance against hydrogen induced cracking. It is deemed to be the most sensible and cost effective solution, since standard Carbon Steel plate is more prone to hydrogen sulphide corrosion in wet H2S and sour service environments, and is a far more cost effective alternative to stainless steel.

Test for Hydrogen Induced Cracking

In essence, HIC Test Report is actually an evaluation of the steel for susceptibility to hydrogen embrittlement. The test procedure involves the evaluation of resistance of pressure vessel steel plate and pipework steels to hydrogen reduced cracking caused by hydrogen absorption from aqueous sulfide corrosion. An unstressed steel sample is exposed to a solution at ambient temperature and pressure and after a designated period, the sample is removed and assessed.

Chemical Analysis of HIC Steel Plates ASTM A516

  • Max Ceq 0.41% <= 50mm, 0.43% > 50mm
  • Max S 0.001%, P 0.008%, Nb 0.015%, V 0.005%, O 0.002%
  • All material is made with an Electric Arc Furnace, fully killed, vacuum degassed, with fine grain.

Chemical Analysis of HIC Steel Plates A516

Mechanical and HIC tests after simulated PWHT at 610°C (2 min/mm).Ambient Tensile Steel and Properties as per standard Charpy impact test longitudinal and transverse direction

  • At -51°C for thickness <= 25mm (20J average /16J individual).
  • At -46°C for thickness >25mm (41J average /34J individual).

HIC Resistant Steel Plate Packing

HIC Resistant Steel Plate is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. HIC Resistant Steel Plate packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Types of Packaging:

  • - Bundles (hexagonal)
  • - Wooden Boxes
  • - Crates (steel/wooden)
  • - Special crates for U-Bend tubes with each radius separated
  • - Packaging for HIC Resistant Steel Plate EN10025-6 as per customer's requirements

Special Features:

  • - Each bundle covered with plastic for protection against extreme weather.
  • - End of HIC Resistant Steel Plate protected by plastic Strip.
  • - Bundles strapped with plastic strips.
  • - Each radius of U-Bend tube separated by a separator.
  • - Packaging list (laminated) placed with box/crate.

HIC Resistant Steel Plates, Sheet, Slabs Sizes Available in Stock with Price HIC Resistant Steel Plate Sizes Available in Stock with Price

  • 0.2 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 0.3 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 0.4 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 0.8 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 1 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 1.65 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 2.11 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 3.1 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 04 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 05 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 06 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 08 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 10 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 12 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 15 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 16 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 18 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 20 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 22 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 25 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 28 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 30 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 32 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 35 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 36 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 38 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 40 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 42 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 45 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 50 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 52 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 60 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 62 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 65 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 70 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 80 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 90 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 100 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 110 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 120 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates
  • 120 MM THICKNESS x WIDTH1000 MM / 1250 MM / 1500 MM / 2000 MM / 2500 MM X LENGTH 1000 MM / 2500 MM / 3000 MM / 6000 MM / COIL CUT in HIC Resistant Steel Plates, HIC Tested Steel Plates, Hydrogen Induced Cracking Tested A516 Plates

HIC Resistant Steel Plates HIC Tested Export Country

We export HIC Resistant Plate to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East.etc.

Prosaic Steel and Alloys is a well known worldwide exporter of HIC Resistant Steel Plate is committed to provide each and every customer with the highest standard of customer service. We deals in HIC Resistant Steel Plate in India & Overseas, offering a wide range of HIC Resistant Steel Plate