Hastelloy Plates - UNS N6022 | UNS N10276

Hastelloy Sheet / Plate / Coil Supplier

Hastelloy C22, Alloy C22, Alloy UNS N6022, 2.4602, NICR21MO14W, NAS NW22, Hastelloy C276, Alloy C276, UNS N10276, 2.4819, NiMo16Cr15W, NAS NW276

Hastelloy Sheet and Plates Stockholder in India.

Hastelloy C22, Alloy C22, Alloy UNS N6022, 2.4602, NICR21MO14W, NAS NW22, Hastelloy C276, Alloy C276, UNS N10276, 2.4819, NiMo16Cr15W, NAS NW276 Prosaic Steel & Alloys is Epitome in supplying, trading and manufacturing an extensive collection of Hastelloy Sheet to the respected customers. We also offer these Hastelloy Plates at best possible rates. Further, to make sure in their blemish free design, we inspect these Hastelloy Coils on predefined quality constraints. Meanwhile, these Hastelloy Slatting Coils are manufactured and designed at our high-tech manufacturing unit, which is fixed by means of strictly cutting – edge amenities and machines. We also offer these products in different grades such as Hastelloy C-22 Plates, Hastelloy C276 Sheets Plates and Coils, Hastelloy N6022 Sheets Plates and Coils, Alloy C276 Sheets Plates and Coils, and Hastelloy Sheets Plates and Coils.

Common Trade Names: Hastelloy C276, Nickelvac® HC- 276, Inconel 276, Nicrofer 5716, Hastelloy C22, Inconel 22, Nicrofer 5621.

The above names are trade names and / or trademarks of specific manufactures including Haynes International, Inc. Prosaic Steel & Alloy is not affiliated with any manufacturer(s). Orders will be filled to meet specifications from any available source(s). Names are listed solely for reference to help identify products consistent with listed specifications.

Range : 5 mm To 50 mm thick in 1000 mm TO 1250 mm width & 6000 mm Length.

Type : Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc.

Hastelloy Plate : Hastelloy C276 Plate- UNS N10276

Hastelloy Sheets and Plates

Hastelloy Sheet ASTM Specification ASTM B575 UNS N6022 / ASTM B575 UNS N10276
Hastelloy Plate, Sheet and Strip Specification ASTM B 575; ASTM B 906 & ASME SB 575; ASME SB 906, ASME Code Case 2226, ASME Code Case N-621, isO 6208, DIN 17750
Alloy Plate Specification ASTM B575 / ASME SB575
Thickness 0.1mm to 20 mm Thk
Width 10-2500mm
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Temper Annealed
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Stock in form of Alloy C22 Plate, Alloy C276 Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate
High Quality
  • Huge Stock, Timely delivery
  • Raw Materials Certificate
  • EN 10204/3.1B
  • 100% Radiography Test Report
  • High special strength, high melt point
  • Third Party Inspection Report, etc
  • Excellent corrosive resistance, good thermal resistance
  • Customer support after-sales service
  • Strict Control from Raw Material to Finished Hastelloy C22 plate
Hastelloy Sheet and Plate profiling To provide a full profiling service we use numerous profiling methods including:
  • Plasma Plate Cutting
  • Laser Plate Cutting
  • Oxy-propane Flame Cutting
Specialized in
  • Hastelloy C22 / C276 Sheet: material under 3/16" [5.00 mm] in thickness and 24" [600 mm] and over in width
  • Hastelloy C22 / C276 Plate: material 3/16" [5.00 mm] and over in thickness and over 10" [250 mm] in width
  • Hastelloy C22 / C276 Strip: cold-rolled material under 3/16" [5.00 mm] in thickness and under 24" [600 mm] in width
  • Hastelloy C22 / C276 Clad plate: Hastelloy C22 Clad plate is a composite steel plate made by bonding Hastelloy C22 plate, etc.

HASTELLOY C276

Hastelloy C276, Nickelvac HC-276, Inconel C276, Nicrofer 5716 offers excellent corrosion-resistant to both oxidizing and reducing media and excellent resistance to localized corrosion attack.

HASTELLOY C-276 alloy is a nickel-molybdenum-chromium wrought alloy that is generally considered a versatile corrosion-resistance alloy. C-276 alloy is an improved wrought version of alloy C in that it usually doesn't need to be solution heat-treated after welding and has vastly improved fabricability. This alloy resists the formation of grain-boundary precipitaties in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition. However, in environments where attack of the C-276 alloy weld joint is experienced, C-22 weld filler materials should be considered.

HASTELLOY C-276 alloy has excellent resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, hot contaminated media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and seawater and brine solutions. It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers. C-276 alloy has excellent resistance to pitting and to stress-corrosion cracking. It is also one of the few materials that withstand the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.

Chemical Analysis of Alloy C276 (UNS N10276)


C
MN P S Si Cr Ni Mo Cu Co Cb+Ta Ti Al Fe W V
.01 max 1.00 max .04
max
.03 max .08 max 14.5 - 16.5 rem 15.0 -17.0 2.5 max 4.0 - 7.0 3.0 - 4.5 .35 max

HASTELLOY C22

Hastelloy C22, Nicrofer 5621 is a most versatile product like nickel-chromium-molybdenum-tungsten alloy available today with improved resistance to both localized and uniform corrosion as well as to a variety of mixed industrial chemicals but the Hastelloy C-22 alloy exhibits superior weldability and is used as weld overlay consumables over and alloy filler wire to improve resistance to corrosion.

Hastelloy C-22 alloy has exceptional resistance to a wide variety of chemical process environments, including strong oxidizers such as cupric and ferric chlorides, chlorine, hot contaminated solutions like (inorganic and organic), acetic anhydride and acetic acids, formic, and seawater and brine solutions. Hastelloy C-22 alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.

Hastelloy C-22 should not be used in service temperatures above 1250° F due to the formation of detrimental phases which form above this temperature.

Hastelloy C22 provides resistance to general corrosion, pitting, crevice corrosion, intergranular attack, and stress corrosion cracking. Hastelloy C22 can be used for many applications such as marine, power, chemical processing, pollution control, paper processing, and waste disposal industries. Hastelloy C22 contains chromium, molybdenum, tungsten, and iron which makes the alloy resistant to corrosion in stagnant or flowing seawater. The alloy is formed by gas tungsten-arc, gas metal - arc, and shielded metal-arc processes.

Chemical Analysis of Alloy C22 (UNS N6022)

Hastelloy C22 Sheet and Plate Chemical Composition

Grade C Mn Si S Co Ni Cr Fe Mo P
Hastelloy C22 0.010 max 0.50 max 0.08 max 0.02 max 2.50 max 50.015 min* 20 – 22.50 2 – 6 12.50 – 14.50 0.02 max

Mechanical Properties of Hastelloy C22 Sheet & Plates

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.69 g/cm3 1399 °C (2550 °F) Psi – 1,00,000 , MPa – 690 Psi – 45000 , MPa – 310 45 %

Equivalent Grades for C22 Hastelloy Sheets & Plates

STANDARD WERKSTOFF NR. UNS JIS GOST EN OR
Hastelloy C22 2.4602 N6022 NW 6022 NiCr21Mo14W

Hastelloy Sheet and Plate serves many different Applications in these Industry Categories:

  • Chemical Process
  • Petrochemical
  • Oil & Gas
  • Pharmaceutical
  • Geothermal
  • Sea Water
  • Water Desalination
  • LNG (Liquefied Natural Gas)
  • Biomass
  • Mining
  • Utilities
  • Nuclear Power
  • Solar Power

Hastelloy C22 Sheet and Plate other Forms Available

  • Hastelloy C22 Coils
  • C22 Alloy Coils
  • Hastelloy UNS N6022 Coils
  • C22 Hastelloy Shim Sheet
  • C22 Alloy Shim Sheet
  • Hastelloy UNS N6022 Shim Sheet
  • Hastelloy WERKSTOFF NR. 2.4602 Shim Sheet
  • ASTM / ASME SB575 Hastelloy C22 Shim Sheet
  • Hastelloy WERKSTOFF NR. 2.4602 Coils
  • ASME SB575 Hastelloy C22 Coils
  • Hastelloy C22 Shim Sheet
  • Alloy C22 Shim Sheet
  • Alloy C22 Coils
  • C22 Hastelloy Coils
  • ASTM / ASME SB575 Hastelloy UNS N10276 Coils
  • Hastelloy C276 Strips
  • Alloy UNS N10276 Strips
  • C276 Hastelloy Strips
  • C276 Alloy Strips
  • C276 Alloy Coils
  • Hastelloy WERKSTOFF NR. 2.4819 Strips
  • ASME SB575 Hastelloy C10276 Strips
  • Hastelloy UNS N6022 Coils
  • Hastelloy WERKSTOFF NR. 2.4819 Coils
  • Hastelloy C10276 Coils
  • Alloy C276 Coils
  • C10276 Hastelloy Coils
  • Hastelloy UNS N10276 Strips

Hastelloy Alloy Sheets Plates and Sheets Packing

Hastelloy Sheets and Plates is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package for easy identification of the quantity and product I.D. Great care is taken during operation and transportation. SS Hastelloy C22 Plate packing will be according to international standard in bundles strapped by strips then into containers to avoid any damage.

Delivery: Within 10-25 days or asap if we have enough stock

Types of Packaging:

  • - Wooden Boxes
  • - Crates (steel/wooden)

Special Features:

  • - Each bundle covered with plastic for protection against extreme weather.
  • - End of Alloy C276 Sheets Plates protected by plastic Strip.
  • - Bundles strapped with plastic strips.
  • - Packaging list (laminated) placed with box/crate.

We export Hastelloy Sheet and Plates to Saudi Arabia, Iran, Iraq, United Arab Emirates, Qatar, Bahrain, Oman, Kuwait, Turkey, Egypt, Yemen, Syria, israel, Jordan, Cyprus, Singapore, Malaysia, Indonesia, Thailand, Vietnam, South Korea, Japan, Sri Lanka, Maldives, Bangladesh, Mayanmar, Taiwan, Cambodia, Argentina, Bolivia, Brazil, Chile, Venezuela, Colombia, Ecuador, Guyana, Paraguay, Uruguay, United States Of America, Canada, Mexico, Panama, Costa Rica, Puerto Rica, Trinidad And Tobago, Jamaica, Bahamas, Denmark, Russia, Norway, Germany, France, Italy, United Kingdom, Spain, Ukraine, Netherland, Belgium, Greece, Czech Republic, Portugal, Hungary, Albania, Austria, Switzerland, Slovakia, Finland, Ireland, Croatia, Slovenia, Malta, Nigeria, Algeria, Angola, South Africa, Libya, Egypt, Sudan, Equatorial Guinea, The Republic Of Congo, Gabon, Europe, Africa, Asia, North America, South America, Middle East, Far East. etc.

Prosaic Steel and Alloys is a well known worldwide exporter of Hastelloy C22 Plates, Prosaic Steel and Alloys is committed to provide each and every customer with the highest standard of customer service. We deals in Hastelloy C276 Sheets in India & Overseas, offering a wide range of Hastelloy Plates and Sheet.

Prosaic Steel and Alloys is Leading Distributor, Exporter, Stockholder and Supplier of Hastelloy Alloy Sheets Plates and Sheets in United States of America (USA), Saudi Arabia, Italy, Netherlands, Germany, Canada, Singapore, Malaysia, Indonesia

hastelloy plate price, hastelloy c276 plate, hastelloy c276 asme specification, astm b575, corrosion materials, sb-575 n10276, hastelloy sheet price, hastelloy c276 sheet, hastelloy c276 asme specification, hastelloy c276 astm standard pdf, astm b575, sb-575 n10276, uns n10276 equivalent, uns n10276 chemical composition, hastelloy c276, hastelloy c276 compatibility chart, hastelloy c276 asme specification, hastelloy c276 data sheet, hastelloy c276 wikipedia, hastelloy c276 temperature limits, hastelloy c22 uns number, alloy c22 vs c276, hastelloy c22 suppliers, hastelloy c22 chemical composition, hastelloy c22 price, hastelloy c22 vs c4, hastelloy c22 compatibility chart, hastelloy c22 properties,